Experimental Research of Low-Grade Tin-Iron Ore Separation

Yi Miao Nie; Qi Hui Dai; Xiao Long Lu

doi:10.4028/www.scientific.net/AMR.641-642.377

Paper Titles

Effect of Organic Montmorillonite on the Cellular Structure and Mechanical Properties of POE/EVA/OMMT Nanocomposite Foams
p.355

Effect of Oxidation on Phase Transformation in Ti-Bearing Blast Furnace Slag
p.363

Experimental Investigations of Cutting Parameters Influence on Cutting Forces and Surface Roughness of Quartz Glass
p.367

Experimental Research about the Application of ER Elastomer in the Shock Absorber
p.371

Experimental Research of Low-Grade Tin-Iron Ore Separation
p.377

Experimental Research on Comprehensive Recovery of Iron and Titanium from the Vanadium-Titanium Magnetite Ore
p.381

Experimental Research on Durability of Concrete Made by Seawater and Sea-Sand
p.385

Experimental Research on Flotation Separation of a Kyanite Rough Concentrate in Hebei Province
p.389

Experimental Research on Mechanical Behavior of Carbon Fiber Reinforced Concrete Beam
p.393

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 641-642Experimental Research of Low-Grade Tin-Iron Ore...

Experimental Research of Low-Grade Tin-Iron Ore Separation

Abstract:

Iron ore and tin mineral are the mainly recovered minerals of the low-grade ore, which could be effectively separated by a strong magnetic separation-gravity concentration process, with ore iron grade of 20.3%, tin grade 0.18%. Stage grinding and stage separation was used, getting the grade of iron concentrate and the recovery rate of tin separation index, the feeder of tin was magnetic separation tailing, by shaking table re-election, obtained tin concentrate grade was 10%, production was 0.34% (compared to the original ore, tin dressing) .Tin concentration ratio reached more than 330.