Electroless Ni-P Plating on Mg-7Al Alloy by Chemical Conversion Pretreatment

Abstract:

Electroless Ni-P plating on Mg-7Al alloy by chemical conversion pretreatment was investigated. Morphology of electroless nickel plating coatings and phase compositions were measured by SEM, EDX and XRD. The optimized bath composition parameters were determined through orthogonal design. The morphology of electroless nickel plating coatings on Mg-7Al alloy exhibits a nodular structure and resembles the surface of a cauliflower and the coating is compact and consists of amorphous Ni-P coating. Potentiodynamic polarization curves of the Ni-P coatings in 3.5% NaCl show that the Ni-P coating extensively improves the corrosion resistance of Mg-7Al alloy and the highest corrosion potential reached to -0.54V vs. SCE(saturated calomel electrode). The results of the orthogonal experiment show that Nickel Sulfate of 25 g/L, Sodium Hypopho-sphate of 25 g/L and Citrate 7.5 g/L can be considered as the optimum bath content parameters for electroless Ni–P plating on Mg-7Al alloy and Nickel Sulfate has more effect on corrosion potential than Sodium Hypophosphate and Citrate..

• Periodical: Advanced Materials Research (Volumes 652-654)
• Pages: 1908-1911
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.652-654.1908
• Online since: January 2013
• Authors: Su Qiu Jia, Jing Xin Guan, Jing Dong Qiu, Hua Chen, Shu Yan Jia
• Keywords: Chemical Conversion, Corrosion, Electroless Ni-P Plating, Magnesium Alloy

References

[1] J.K. Lin, C.L. Hsia and J.Y. Uan: Scripta Materialia, Vol. 56 (2007) , pp.927-930.

[2] M. Santamaria, F. Di Quarto, S. Zanna, P. Marcus: Electrochimica Acta, Vol. 53 (2007), p.1314.

[3] Adel Mesbah, Caroline Juers, Francoise Lacouture, et al: Solid State Sciences vol. 9 (2007), p.322.

[4] Qing Li, Shuqiang Xu, Junying Hu et al: Electrochimica Acta, Vol. 55(2010), p.887.

[5] Abdel Salam Hamdy: Surface & Coatings Technology, Vol. 203 (2008), p.240.

[6] F. Zucchi, A. Frignani, V. Grassi, G. Trabanelli et al: Corrosion Science , Vol. 49(2007) , p.4542.

DOI: 10.1016/j.corsci.2007.04.011

[7] C.S. Lin , H.C. Lin , K.M. Lin , W.C. Lai: Corrosion Science, Vol. 48(2006), p.93.

[8] Mustafa Anık , Erhan Körpe : Surface & Coatings Technology , Vol. 201(2007) , p.4702.

[9] W.X. Zhang, J.G. He, Z.H. Jiang et al: Surface & Coatings Technology, Vol. 201(2007), p.4594.

[10] A. Araghi, M.H. Paydar: Materials and Design , Vol. 31(2010), p.3095.

[11] Liuhui Yu, Weigang Huang, Xu Zhao: Journal of Alloys and Compounds, Vol. 509 (2011), p.4154.

[12] Gou Yinning, Huang Weijiu, Zeng Rongchang, Zhu Yi: Trans. Nonferrous Met. Soc. China, Vol. 20 (2010), p. s674.

[13] Prasanta Sahoo , Suman Kalyan Das: Vol. 32 (2011), p.1764.

[14] K. Krishnaveni, T.S.N. Sankara Narayanan, S.K. Seshadri: Surface & Coatings Technology, Vol. 190(2005), p.117.