Die Casting Mold Design of Auto Oil Pump Bracket

Yan Jiang; Yong Su; Ping Hu; Wen Ping Chen

doi:10.4028/www.scientific.net/AMR.652-654.2460

Paper Titles

Application of the Dynamic Soft-Reduction Technology on the No.4 Slab Continuous Caster of Bayi Steel
p.2441

Effects of Argon Partial Pressure on Interfacial Shape of Porous Copper under Unidirectional Solidification
p.2446

Numerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round Bloom
p.2450

The Study on Microstructures and Properties of the Direct Squeeze Casting Al-Zn-Mg-Cu-Zr-Sc Alloy
p.2455

Die Casting Mold Design of Auto Oil Pump Bracket
p.2460

Analysis of Elemental Segregation in a Microalloyed Cast Steel
p.2465

Mineral Processing Experiment of Copper Mineral in Yunnan Province
p.2471

Mineral Processing Experiment of Quartz from Gold Ore Tailing
p.2475

Analysis of Tight Gas Reservoir Forming Condition in Gulong-Changjiaweizi Region, Northern Songliao Basin
p.2478

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 652-654Die Casting Mold Design of Auto Oil Pump Bracket

Die Casting Mold Design of Auto Oil Pump Bracket

Abstract:

This paper introduces a die-casting mold design process. On the basis of the shape of Car oil pump support, central of castings’ side face was selected as the mold joint; due to the design requirements of pouring system, we chosen bias running system. Castings’ size was calculated by requirement of die casting machine, then accomplished designs of molding and structure’s components. Because through holes which on the side face of castings are not deep, angular pin core puller is competent, at last, the final assembly of the mold and the simulation is completed.

You might also be interested in these eBooks

Advances in Materials and Materials Processing

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 652-654)

Pages:

2460-2464

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.652-654.2460

Citation:

Cite this paper

Online since:

January 2013

Authors:

Yan Jiang*, Yong Su, Ping Hu, Wen Ping Chen

Keywords:

Aluminum (Al), Bracket, Die Casting, Mold

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Huang Yong, Huang Yao. Die-Casting mold Design Practical Tutorial (Chemical Industry Press, PRC, 2011)

Google Scholar

[2] J. Y. Li, X. L. Zhang. 3D Design of Casting Molds and Calculation Guidance (Beijing: Chemical Industry Press, 2010)

Google Scholar

[3] Z. M. Liu, P. Y. Wang, J. Li. Die Casting Technology and Application (Tianjin University Press, PRC, 2010)

Google Scholar

[4] Q. Liu. Die-Casting Mold Design of Aluminum Alloy Cover (Manufacturing Equipment and Technology, PRC, 2010)

Google Scholar

[5] X. Z. Pan. Casting mold Design Handbook (3rd Edition) (Machinery Industry Press, PRC, 2006)

Google Scholar

[6] L. T. Pan. Engineering Graphics (China Science and Technology University Press, PRC, 2006)

Google Scholar

[7] A. P. Zhao, R. Tian. Quality Control of Die-Cast Aluminum Castings Southwest Forestry College, 2006, 4 (26): 81

Google Scholar