Experimental Study on Improving Seismic Performance of Load-Bearing Masonry Walls Made of Autoclaved Aerated Concrete

Jing Hai Yu; Jian Feng Cao; Tian Hui Fei

doi:10.4028/www.scientific.net/AMR.671-674.661

Paper Titles

Comparative Analysis of Traditional Braced Wall System and Retaining Wall System with Pre-Stressed Wale and Square Pipe Struts
p.642

Compressive Testing of H-Shaped Steel Stub Columns Fabricated with Grade 800MPa High Performance Steel
p.646

Damage Inspection and Assessment on a Transmission Angle Tower in Coastal Areas
p.650

Elastic Results’ Comparison between Computing and Test of a Scaled Model of a Complex Supertall Building
p.655

Experimental Study on Improving Seismic Performance of Load-Bearing Masonry Walls Made of Autoclaved Aerated Concrete
p.661

Experimental Study on Local Compression of Concrete-filled Glass Fiber Reinforced Gypsum Wall Panel
p.668

Experimental Study on the Corrosion Rate of Rebars in Chloride-Contaminated Concrete with Adding or Painting Inhibitors
p.674

Finite Element Analysis of Corrugated Mild Steel Damper
p.678

Finite Element Analysis of Historical Construction with Differential Settlement
p.684

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 671-674Experimental Study on Improving Seismic...

Experimental Study on Improving Seismic Performance of Load-Bearing Masonry Walls Made of Autoclaved Aerated Concrete

Abstract:

Experiments of a piece of comparable block wall and five pieces of block walls with different constructional type subjected to low reversed cyclic loading have been conducted. Investigation has been made on the failure pattern, hysteretic loop curves, displacement-restoring capacity and displacement ductility of walls. The experimental results revealed that the seismic performance of block masonry walls, which used the constructional column and concrete strips, was improved remarkably. It set a sound basis for further analysis research and engineering practice on AAC load-bearing walls in the future.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 671-674)

Pages:

661-667

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.671-674.661

Citation:

Cite this paper

Online since:

March 2013

Authors:

Jing Hai Yu, Jian Feng Cao, Tian Hui Fei

Keywords:

Autoclaved Aerated Concrete (AAC), Bearing Structure Seismic Performance, Concrete Strips, Constructional Column

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Lianyu Gao. Aerated concrete application technology collected papers (1991). China aerated concrete association application technology department. 1999. In Chinese.

Google Scholar

[2] Quanbin Zhao. Autoclaved aerated concrete bearing wall seismic performance test research [master's degree thesis]. Tianjin University, 2005. In Chinese.

Google Scholar

[3] The industry standard of the People's Republic JGJ101-96. Specificating of Testing Methods for Earthquake Resistant Building [S]. In Chinese.

Google Scholar

[4] Urban and rural construction and environmental protection ministry standard. Technical specification of autoclaved aerated concrete[S], 2008. In Chinese.

Google Scholar

[5] Autocalved Aerated Concrete Properties, testing and would RILEM Recommended Practice, RILEM Technical Committees 78-MCA and 51-ALC, First edition (1993).

Google Scholar

[6] Dejian Yang, Yongfu Gao, Jinbiao Sun, etc. Journal of Building Structures, 2000, 21(4): 22-27. In Chinese.

Google Scholar

[7] Caiyuan Cheng, Bolong Zhou, Xiaomin Wang. Sichuan Building Scientific Research, 1989 (4): 2-6. In Chinese.

Google Scholar

[8] Liqun Li, Weiqing Liu. Journal of Engineering Seismic. 2001(4): 16-20. In Chinese.

Google Scholar