The Evaluation of Factors Affecting the Performance of Heavy Oil Emulsion

Zhen Zhong Fan; Tong Wang; Peng Peng Li; Ji Gang Wang; Qing Wang Liu

doi:10.4028/www.scientific.net/AMR.690-693.1508

Paper Titles

Removal Efficiency and Distribution Characteristics of PAHs in Coking Plant Contaminated Soils by In Situ Chemical Oxidation Remediation
p.1490

Cascaded Columns of Total Reflux Batch Distillation with Periodic Liquid Exchange
p.1495

Effects of Microwave Power on Performance of Pt/CeO₂MWCNTs Catalysts Prepared by Microwave-Assisted Polyol Process for Methanol Electrooxidation
p.1500

Experimental Study of Optimal Coagulation Effect on Three Kinds of Direct Sun-Proof Dyes by FeCl₃
p.1504

The Evaluation of Factors Affecting the Performance of Heavy Oil Emulsion
p.1508

Kinetic of C.I. Reactive Black 5 by Fenton-Like Oxidation
p.1512

Research on Tubing and Casing Corrosion in Sour Gas Reservoirs and Corrosion-Resistant Material Selection
p.1516

Material Selection of Water-Ring Vacuum Pump in Yellow Phosphorus Tail Gas Industry
p.1520

Preparation of Strontium-Barium Hydroxyapatite by Coprecipitation
p.1524

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 690-693The Evaluation of Factors Affecting the...

The Evaluation of Factors Affecting the Performance of Heavy Oil Emulsion

Abstract:

In this paper,we used the heavy oil of Du 84,53-55 well in Liaohe oil field,analyzed of the impact factors of the heavy oil emulsion viscosity.When the droplet size of the emulsion is reduced,the viscosity of the heavy oil emulsion increases,and the non-Newtonian obvious.Heavy oil emulsions exhibit Newtonian fluid properties at low shear rate,exhibits shear-thinning properties in the heavy oil emulsion under high shear rate.Heavy oil emulsion viscosity decreases with the increasing concentration of viscosity reducer,when the viscosity reducer concentration of more than 0.25%,heavy oil emulsion viscosity declines slowed.

You might also be interested in these eBooks

Materials Design, Processing and Applications

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 690-693)

Pages:

1508-1511

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.690-693.1508

Citation:

Cite this paper

Online since:

May 2013

Authors:

Zhen Zhong Fan, Tong Wang, Peng Peng Li, Ji Gang Wang, Qing Wang Liu

Keywords:

Heavy Oil Emulsion, Mixing Intensity, Rheological Property, Viscosity

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] H.L. Chen, Y.S. Chen, R.S. Juang. Separation of surfactin from fermentation broths by acid precipitation and two-stage dead-end ultrafiltration processes. Journal of Membrane Science, 2007, 299(1-2):114-121.

DOI: 10.1016/j.memsci.2007.04.031

Google Scholar

[2] M.S. Yeh, Y.H. Wei, J.S. Chang. Bioreactor design for enhanced carrier-assisted surfactin production with Bacillus subtilis. Process Biochemistry, 2006, 41(8): 1799-1805.

DOI: 10.1016/j.procbio.2006.03.027

Google Scholar

[3] Pekdemir T, Copur M, Urum K. Emulsification of crude oil-water systems using biosurfactants [J]. Process Safety Environ.Prot, 2005, 83(B3):38-46.

DOI: 10.1205/psep.03176

Google Scholar

[4] Maneerat S, Phetrong K.Isolation of biosurfactant-producing marine bacteria and characteristics of selected biosurfactant [J]. Songklanakarin J.Sci.Technol, 2007, 29(3):781-791.

Google Scholar