Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints Using Homogeneous Welding Wire

Hao Wang; Chang Shu He; Hong Jun Zhang; Dong Wang; Xiang Zhao; Liang Zuo

doi:10.4028/www.scientific.net/AMR.712-715.647

Paper Titles

Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging
p.627

Research on Simulation Process of Rock Broken by TBM Hob
p.633

Research on Bending Angels of Laser Peen Forming without Confine Layer
p.637

The Impact Analysis of Stamping Process Factors Based on Dynaform
p.642

Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints Using Homogeneous Welding Wire
p.647

An Approach to Improve Thickness Uniformity of TA15 Tubular Part Formed by Gas Bulging Process
p.651

Study of Hot Deformation Behavior in GH4169 Superalloy
p.658

Springback Distortion Research on Offset Strip Fin Based on ANSYS
p.662

Characteristics of YAG-MIG Hybrid Welding 6061 Aluminum Alloy with Different States
p.666

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 712-715Microstructure and Mechanical Properties of...

Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints Using Homogeneous Welding Wire

Abstract:

A novel Al-12.7Si-0.7Mg welding wire was successfully produced via DC casting, extrusion, roll die drawing and hole die drawing. An investigation was performed on the microstructure and mechanical properties of the welded joints using the as-produced special filler wire in different solid solution and artificial aging treatment conditions. The results showed that the as-produced Al-12.7Si-0.7Mg welding wire was an ideal special wire of the Al-12.7Si-0.7Mg wrought alloy and the homogeneous welded joints proved to be heat-treatable. Solid solution treatment and artificial aging treatment had significant influence on the microstructure, microhardness and tensile properties of the as-welded joints. A transformation of microstructures from a coarse structure to a fine structure occurred in the welded joints after the heat treatment. The microhardness and the strength of the joints increased remarkably as the solution temperature and aging time increased.