The Prickle and Pressure Comfortability Evaluation of T/R/H Multi-Component Fabric

Abstract:

Most bast fibers and leaf fibers are harsh ,stiff and of high initial modulus, so the fabric made of them are prickling and difficult to go out of shape. The prickle and local stress of the fabric which are made of the blend of hemp, viscose and micro-porous polyester fiber were tested here, and the effect of the structure of the fabric on the prickle and local stress were analysed. It can be seen from the test result that the hemp content was not the most important factor to the prickle, warp and weft shrinkage and fabric count influence the prickle the most. As far as the local stress is concerned, he fabric pattern influence the stress transmission within the fabric obviously.

• Periodical: Advanced Materials Research (Volumes 712-715)
• Pages: 735-738
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.712-715.735
• Online since: June 2013
• Authors: Ya Feng Duan, Jiang Wei Yao
• Keywords: HEMP, Local Mechanical Property, Multi-Component Blended, Prickle

References

[1] Xianggang YIN, Junkai HUA, Buoying ZHU. Present state and development of hemp processing technology [J]. Journal of Tianjin Institute of Textile Science and Technology, 2003, 22(1): 13—17. In Chinese

[2] Fanchang JLANG, Yan ZHOU, Ynanmin ZHANG, el a1. Investigation on micro-structure and property of flax, oil flax and hemp [J]. Journal of Textile Research, 1990, 1l(9): 388—391. In Chinese

[3] Xiaoyin SUN, Yingting GUAN, Guiqing WEN, et a1. Study on the characteristics of hemp fibres and applications [J]. Journal of Textile Research, 2001, 22(7): 34—36. In Chinese

[4] Julong DENG. Basic Gray System [M]. Wuhan: Hua zhong University of Science and Technology Publishing House, 200l: l—62. In Chinese