Physical Properties of Polymer Blend: Natural Rubber Glove Waste/Polystyrene Foam Waste/ Cellulose Fiber via Brabender

Patompong Phummor; Sa Ad Riyajan; Pramuan Tangboriboonrat

doi:10.4028/www.scientific.net/AMR.844.57

Paper Titles

Value Adding of Skim Natural Rubber by Grafting with Maleic Anhydride
p.41

The Influence of Zinc Dimethacrylate on Crosslink Density, Physical Properties and Heat Aging Resistance of Sulfur Vulcanized Styrene Butadiene Rubber
p.45

Effect of Unmodified and Modified Epoxidized Soyabean Oils on Properties of Black-NBR Compounds and Black-NBR Vulcanizates
p.49

Phase Morphology, Thermal and Mechanical Properties of Compatibilized Nylon12/Natural Rubber Blends Using PS/MNR
p.53

Physical Properties of Polymer Blend: Natural Rubber Glove Waste/Polystyrene Foam Waste/ Cellulose Fiber via Brabender
p.57

Effect of NR/ABS Ratio on Mechanical, Dynamical and Morphological Properties of Vulcanized NR/ABS Blends
p.61

Thermal and Mechanical Properties of Mulch Film from Poly(Lactic Acid)/Expoxidized Natural Rubber Blends Filled with Rutile TiO₂ as Fillers
p.65

Changes in Mixing Torque, Mechanical and Dynamic Rheological Properties of Epoxidized Natural Rubber and Copolyester Blends as Affected by Epoxidized Natural Rubber Contents
p.69

Water Absorption and Swelling Property of Interpenetrating Network Hydrogel from Crosslinked Natural Rubber and Modified Rice Starch
p.73

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 844Physical Properties of Polymer Blend: Natural...

Physical Properties of Polymer Blend: Natural Rubber Glove Waste/Polystyrene Foam Waste/ Cellulose Fiber via Brabender

Abstract:

The polymer blend was prepared from the wastes of natural rubber glove (NRG) and polystyrene foam (PSf) blended with cellulose via brabender method. NRG was masticated by two-roll mill at ambient temperature, and then blended with PSf with or without sugar cane leave fiber (fsu) by brabender at 120°C. Then, the polymer blend sheet was continued to compress by compression machine at 120 ^๐C for 5 min. The effects of epoxidized natural rubber (ENR) having 25% mol epoxidation (ENR-25) and fsu on the physical properties of polymer blend were investigated. At 20 phr of fsu, the highest tensile strength of this sample was achieved. The toluene resistance of the polymer composite was improved by adding ENR-25 and fsu. In addition, the elongation of the polymer composite was enhanced by addition of ENR-25. The best condition of the polymer blend was 50/50 PSf /NRG, 23 phr ENR-25 and 23 phr fsu.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 844)

Pages:

57-60

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.844.57

Citation:

Cite this paper

Online since:

November 2013

Authors:

Patompong Phummor, Sa Ad Riyajan, Pramuan Tangboriboonrat

Keywords:

Blend, Brabender, Cellulose, Natural Rubber (NR)

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] S. Riyajan, J.T. Sakdapipanich, T. Yasuyuki. Controlled degradation of cured natural rubber by encapsulated benzophenone as a photosensitizer. J. Appl. Polym. Sci. 90 (2003) 297-305.

DOI: 10.1002/app.12784

Google Scholar

[2] A. Thitithammawong, C. Nakason, K. Sahakaro, J.W.M. Noordermeer. Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Selection of optimal peroxide type and concentration in relation to mixing conditions. Eur. Polym. J. 43 (2007).

DOI: 10.1016/j.eurpolymj.2007.06.035

Google Scholar

[3] V.V. Rajan, W.K. Dierkes, R. Joseph, J.W.M. Noordermeer, Science and technology of rubber reclamation with special attention to NR-based waste latex products. Prog. Polym. Sci. 31 (2006) 811-834.

DOI: 10.1016/j.progpolymsci.2006.08.003

Google Scholar

[4] S. Riyajan, I. Intharit, P. Tangboriboonrat Physical properties of polymer composite: Natural rubber glove waste/polystyrene foam waste/cellulose. Ind. Crop Prod. 36 (2012) 376–382.

DOI: 10.1016/j.indcrop.2011.10.017

Google Scholar