Effect of Hydrolyzed Polyacrylamide Used in Oil Recovery on Characters of Crude Oil

Chun Juan Hou; Qing Zhe Jiang; Zhao Zheng Song; Guo Rong Tan; Shuai Zheng; Shao Hua Li

doi:10.4028/www.scientific.net/AMR.884-885.55

Paper Titles

Combustion Kinetic Analysis of Lignite in Different Oxygen Concentration
p.37

Comparison Study on Hospital Wastewater Disinfection Technology
p.41

Comparison Study on Measuring Ammonia and Nitrogen in Surface Water by Flow Injection and Nessler's Reagent
p.46

Effect of Dendritic Architecture on Photochromism of Spiropyran Functionalized Dendrigraft Polybutadiene
p.51

Effect of Hydrolyzed Polyacrylamide Used in Oil Recovery on Characters of Crude Oil
p.55

Effect of Ionic Liquid Pretreatment on the Structure and Enzymatic Saccharification of Cassava Stillage Residues
p.59

Effects of Process Parameters on Hydrophobicity of Alumina Surfaces Fabricated by Hard Anodizing
p.64

Flow Field Analysis of PVC Polymerizer
p.68

Influence of Zirconium Oxide on Thermal Degradation and Flame Retardancy of Viscose Fibers
p.73

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 884-885Effect of Hydrolyzed Polyacrylamide Used in Oil...

Effect of Hydrolyzed Polyacrylamide Used in Oil Recovery on Characters of Crude Oil

Abstract:

The major objectives of this study are to experimentally investigate the influences of hydrolyzed polyacrylamide (HPAM) used in oil recovery on characters of crude oil. The HPAM is SNF 3640D from SNF Floerger in French. The experiments were putting HPAM with different concentrations into crude oil, and analyzing the basal characters of crude oil. Settling experimental results showed that the content of resin and asphaltene were decrease with the increase of HPAM concentrations. The viscosity of crude oil had relation to HPAM concentrations, when the concentration of HPAM reaching 700 mg/l, the viscosity would increase about 15 percent. The forms of HPAM were observed by environment scanning electron microscope (ESEM) also changed, at first the HPAM gathered into mass, in the end the HPAM was taken off with produced water presented longer linear.

You might also be interested in these eBooks

Biotechnology, Chemical and Materials Engineering III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 884-885)

Pages:

55-58

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.884-885.55

Citation:

Cite this paper

Online since:

January 2014

Authors:

Chun Juan Hou*, Qing Zhe Jiang, Zhao Zheng Song, Guo Rong Tan, Shuai Zheng, Shao Hua Li

Keywords:

Asphaltene, Characters of Crude Oil, Effect on Crude Oil, HPAM, Resin

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Yuzhang Liu: EOR polymer flooding technology. Beijing, Petroleum Industry Press (2006), pp.69-71.

Google Scholar

[2] Chengyu Zhou, Ying Xiao et al.: China Surfactant Detergent & Cosmetics Vol. 41(2011), pp.131-134.

Google Scholar

[3] Shedid A. Shedid: Journal of Petroleum Science and Engineering 50(2006), pp.285-292.

Google Scholar

[4] Mingzhe Dong, Shanzhou Ma, Qiang Liu: Fuel 88(2009), pp.1049-1056.

Google Scholar

[5] Yang Liu, Xiangling Tan, Wei Jiang et al.: Offshore Oil, Vol. 28(2008), pp.38-42.

Google Scholar

[6] Shubo Deng, Renbi Bai,J. Paul Chen et al.: Colloids and Surfaces A: Physicochem. Eng. Aspects 211(2002), pp.275-284.

Google Scholar

[7] Hongming Tang, Peng Liu, Jing Li et al.: Special Oil & Gas Reservoirs, Vol. 19(2012), pp.134-138, 146.

Google Scholar

[8] Xianbo Zhang, Jicheng Xu, Bin Wu et al.: Oil-Gasfield Surface Engineering, Vol. 25(2006), pp.50-51.

Google Scholar