Laboratory Evaluation on Foaming Agent for High-Temperature and High-Salinity Reservoir

Ji Chao Fang; Cai Li Dai; Kai Wang; Qin Fang Ding; Si Yu Wang

doi:10.4028/www.scientific.net/AMR.884-885.82

Paper Titles

Effects of Process Parameters on Hydrophobicity of Alumina Surfaces Fabricated by Hard Anodizing
p.64

Flow Field Analysis of PVC Polymerizer
p.68

Influence of Zirconium Oxide on Thermal Degradation and Flame Retardancy of Viscose Fibers
p.73

Influence on Desulfurization Capacity of Flue Gas Desulfurization Solution
p.78

Laboratory Evaluation on Foaming Agent for High-Temperature and High-Salinity Reservoir
p.82

Laser-Controlled Combustion of Solid Propellant
p.87

Minimization of the Disinfection by-Product Precursors in Treated Waters Exposed to Ozone and Chlorine
p.91

Molecular Design and Synthesis of Wettability Alteration Chemicals
p.96

New Insight into Wettability Alteration to Gas Wetness: Core Experiment and Modeling
p.100

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 884-885Laboratory Evaluation on Foaming Agent for...

Laboratory Evaluation on Foaming Agent for High-Temperature and High-Salinity Reservoir

Abstract:

In order to further enhance oil recovery (EOR) of the high temperature and high salt oil fields by foam flooding, one foaming agent was screened by airflow method. The influence of oil-water and pressure on foamability and stability were evaluated,and oil displacement experiment was also conducted. The results show that CS-1 foaming agent has better foamability and stability than the others under the reservoir conditions (Temperature 110 °C, Salinity 11.52×10⁴ mg/L, Ca²⁺&Mg²⁺ 7654 mg/L). The foam stability will be better as the pressure rise or be worse when it met the crude oil. Oil recovery was improved by 4.13% after waterflood and the total recovery is 60.75%.

You might also be interested in these eBooks

Biotechnology, Chemical and Materials Engineering III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 884-885)

Pages:

82-86

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.884-885.82

Citation:

Cite this paper

Online since:

January 2014

Authors:

Ji Chao Fang, Cai Li Dai, Kai Wang, Qin Fang Ding, Si Yu Wang

Keywords:

Foam Stability, Foaming Agent, High-Salinity, High-Temperature

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Zhent Lijun, Zhang Tao, Wang Xinhong, et al: Screening and Evaluating of Foaming Agent Used for Nitrogen Gas Foam Oil Displacement. Chemical Engineering of Oil&Gas Vol. 6(2011), p.1.

Google Scholar

[2] Yuan shiyi, Liu Shangqi, Zhang Yitang, Zhang Shimin, Zhao Guoping: Enhancing heavy oil recovery with hot water flooding by adding nitrogen and surfactant. Acta Petrol Ei Sinica Vol. 25(2004), p.57.

Google Scholar

[3] Wang Peihua: Overview on technology of water shutoff/profile control agent of foam. Drilling&Production Technology Vol. 23(2000), p.60.

Google Scholar

[4] Liu Zupeng, Li Zhaomin, Li Binfei, et al: Stuty on Enhanced Oil Recovery in Profile Control and Flooding by the Multi phase Foam System. Chemical Engineering of Oil&Gas Vol. 39(2010), p.242.

Google Scholar

[5] Li Haitao, Li Hongjian, Zhao Min: Study on Water Quality Strategy for Conpatiabli Wataer Injection in Sandstones. Journal of Southwest Petroleum University(Science & Technology Edition) Vol. 19(1997), p.35.

Google Scholar

[6] Guo Zhiwei, Xu Changxue, Lu yao, Zhou Lizhuang: Foamability and stability of foam and means of evaluating Vol. 127(2006), p.51.

Google Scholar

[7] Sheng Qiang, Guo Ping, Cheng Jing, Du Jianfen, Wang Yuhua: Research on visual characteristics of foam in porous media. Special Oil and Gas Reservoir Vol. 19(2012), p.122.

Google Scholar