Study on the Corrosion Resistance of Slag α-Sialon Ceramics to NaOH and HNO3

Qing Tao Cheng; Yun Wang; Dong Dong Xu; Jiu Xin Jiang

doi:10.4028/www.scientific.net/AMR.898.181

Paper Titles

Influence of Overlapping Ratio on Microstructure and Mechanical Properties of Hardened Layer
p.164

Microstructures in Solidification Simulation of Electron Beam Scanning with MC in Molten Pool
p.168

Fabrication of Hexagonal Ni Micro/Nano Plates by a Facile Hydrothermal Reduction Route
p.173

Preparation of Epoxy Grafted Acrylate Composite Latex and its Film Property
p.177

Study on the Corrosion Resistance of Slag α-Sialon Ceramics to NaOH and HNO₃
p.181

Experimental Study on Conduction Heating of Ultra-High Strength Boron Steel
p.185

The Uniform Elongation Experiment of Web and Flange of H-Beam
p.189

H-Beam Cross Sectional Microstructure Influence on its Mechanical Properties
p.193

The Rolling Deformation Characteristics of Rail with Corrugated Web
p.197

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 898Study on the Corrosion Resistance of Slag α-Sialon...

Study on the Corrosion Resistance of Slag α-Sialon Ceramics to NaOH and HNO₃

Abstract:

The corrosion resistance of slag α-Sialon ceramics, prepared via pressure-less sintering and hot-pressing from slag α-Sialon powder, to NaOH and HNO₃ was studied in this work. The result shows that slag α-Sialon ceramics have exellent corrosion resistance to NaOH and good resistance to HNO₃. The corrosion mechanism and corrosion mode of acid and alkali to slag α-Sialon ceramics was investigated by means of scanning electron microscopy (SEM), and the results indicate that the corrosion of acid and alkali to hot-pressing ceramic is the slow surface corrosion, not only on the crystal grains, but also on the grain boundary phase, while the fast pitting is the dominant corrosion mode for pressure-less ceramic. The corrosion of NaOH solution to ceramics mainly occurred the grain boundary phase, while not only the grain boundary phase, but also crystal phase are corroded by HNO₃.

You might also be interested in these eBooks

Applied Material Science and Related Technologies

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 898)

Pages:

181-184

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.898.181

Citation:

Cite this paper

Online since:

February 2014

Authors:

Qing Tao Cheng, Yun Wang, Dong Dong Xu, Jiu Xin Jiang*

Keywords:

Corrosion Mechanism, Corrosion Resistance to Acid, Corrosion Resistance to Alkali, Slag α-Sialon Ceramics

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] T Ekström, M Nygren. SiAION ceramics[J]. J. Am. Ceram. Soc., 1992, 75.

Google Scholar

[2] 259-276.

Google Scholar

[2] W W Chen, P L Wang, D Y Chen, et al. Synthesis of (Ca, Mg) α-Sialon from slag by Self- propagating high-temperature synthesis[J]. J. Mater. Chem., 2002, 12: 1199-1202.

DOI: 10.1039/b200540a

Google Scholar

[3] J X Jiang, P L Wang, W W Chen, et al. Study on phase assemblages of (Ca, Mg) α-Sialon ceramics starting from SHS-ed α-Sialon powder[J]. J. Eur. Ceram. Soc., 2003, 23: 2343-2349.

DOI: 10.1016/s0955-2219(03)00043-8

Google Scholar

[4] H Zhang, Y Deng, Y Zhang, J X Jiang, Study on phase stability during pressure-less sintering process of slag α-Sialon powder and properties of as-sintered materials[J]. Adv. Mater. Res., 2013, 746: 97-100.

DOI: 10.4028/www.scientific.net/amr.746.97

Google Scholar

[5] J X Jiang, P L Wang, W W Chen, et al. Synthesis of slag α-Sialon powder by SHS and properties of slag α-Sialon Ceramics[J]. J. Inorg. Mater., 2004, 19: 953-957.

Google Scholar