Toughening of Epoxy Resin Modified with In Situ Polymerized Acrylate Copolymer

Tao Wang; Jun Wang; Bin Zhang

doi:10.4028/www.scientific.net/AMR.910.70

Paper Titles

Preparation and Analyzing Character of Chitosan Block in Fluffy Meshwork Shape Formed from Chitosan Fine Hair
p.53

Deep Desulfurization of Diesel Fuel Oxidized with TBHP Coupled with Solvent Extraction Intensified by Ultrasound
p.57

An Orthogonal Experimental Analysis of WEDM-HS of Al₂O₃ Particle-Reinforced Aluminum Alloy 6061 with 10-Vol% Al₂O₃
p.61

Research on Biological Materials for the Preferred of the Chlorophyll Content Gray GM (1,1) Prediction Models Based on the Different Light
p.65

Toughening of Epoxy Resin Modified with In Situ Polymerized Acrylate Copolymer
p.70

Study on Elastic Modulus of Porous Ti Coatings by Three-Point Bending and Indentation Measurement
p.74

Evaluation of Acoustic Characteristics for Various Composite Ventilation Material by Using Impedance Tube
p.78

Effect of Vermiculite and Bulk Density in the PU Foam Composite Board for the Absorption Coefficient and Acoustic Impedance
p.82

Low-Phosphorus Electroless Nickel-Coated Carbon Fibers
p.86

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 910Toughening of Epoxy Resin Modified with In Situ...

Toughening of Epoxy Resin Modified with In Situ Polymerized Acrylate Copolymer

Abstract:

P(BA-St), a good modifier for epoxy resin, was prepared by BA and St in situ polymerization. The modified resin system was based on diglycidyl ether of bisphenol and methyl tetrahydrophthalic anhydride, tris (dimethylaminomethyl) phenol. The influence of the copolymer on mechanical properties and thermal performance of the systems was studied. When 15 wt% of the BA/St with a weight ratio composition of 7.5/7.5 was added to epoxy, high performance modified epoxy resin was obtained.