Analysis of Suitability of Mortar Used for Reconstruction

Radka Pernicová; Daniel Dobiáš

doi:10.4028/www.scientific.net/AMR.923.77

Paper Titles

The Application of Nanomaterials in Restoring Historic Structures
p.52

Experimental Comparison of Moisture Characteristics of Two Types of Sandstone
p.59

Selected Non-Destructive Methods Suitable for Evaluation of Roofing Slate
p.63

The Influence of Mineralogical Composition Changes of Sandstone Cement on Physical-Mechanical Properties
p.71

Analysis of Suitability of Mortar Used for Reconstruction
p.77

Load-Bearing Capacity Determination of Historic Masonry Structures
p.81

Determination of Selected Mechanical and Physical Properties of Historic Full Burnt Bricks in Frame of Project of Monitoring their Diffusion Properties
p.85

Effect of Pozzolanic Additive on Pore Structure of Cement Mortar
p.89

Stabilization and Strengthening of Historic Buildings' Stone Masonry Columns
p.93

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 923Analysis of Suitability of Mortar Used for...

Analysis of Suitability of Mortar Used for Reconstruction

Abstract:

Assessment of suitability of mortar intended for reconstruction based on their characteristics, namely basic, hygric and mechanical parameters, chemical analysis and frost resistance, is presented in this paper. Properties of the load bearing structure as well as natural factors were also taken into account in assessing the suitability of the used mortars. Comparative measurements with original historic plaster are done as well. On the basis of the experiments performed, it can be concluded that not only mortar properties but also environment conditions and technology of application as well as load bearing structure characteristics have a great importance to the service life of the repaired parts of historical buildings.