Study on Pharmaceutical Wastewater Pretreated by Chemical Coagulation Method

Article Preview

Abstract:

This study took three factors three levels orthogonal experiment scheme and chose PAM as the coagulant, pretreated a pharmaceutical factory wastewater by chemical coagulation method, and the results indicated: when coagulant dosage was 50 mg/L, pH was 5 and mixing time was 20 minutes, the removal efficiency of SO42- and COD could be 39.0% and 72.5% respectively. The water quality could meet the requirements of the subsequent treatment processes.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

220-225

Citation:

Online since:

May 2014

Authors:

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2014 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] B.Q. Su, Y.X. Li. Biological Reduction of Sulfate and The Removal of Heavy Metals. Industrial Water Treatment, Vol. 25(2005), pp.1-4.

Google Scholar

[2] Y.Q. He, Y.Q. Wu, J.L. Liu. Study on Coagulation Pretreatment of High Concentration Pharmaceutical Wastewater. China Rural Water and Hydropower, Vol. 4(2008), pp.66-68.

Google Scholar

[3] Water Quality - Determination of Sulfate - Gravimetric Method, GB/T11899-1989. Standards Press of China (2007).

Google Scholar

[4] D.L. Xi, Y.S. Sun, X.Y. Liu. Hong. Environmental Monitoring (Third Edition). Higher Education Press(Beijing 2004).

Google Scholar