The Orthogonal Test and Optimal Decision for the Development of New Backfill Cementing Materials Based on the Rod Milling Sand

Abstract:

The experiment uses lime, desulfurization ash, slag and other solid wastes with mirabilite and NaOH as the admixture for Jinchuan mine rod milling sand to get a new backfill cementing materials that can replace the cement materials. There obtains the influence of activators to strength of the new backfill cementing materials’ body through the orthogonal experiment. The MATLAB genetic programming is exploited for getting the regression function of compressive strength and shrinkage rate for the new backfill cementing materials. Using the genetic algorithm to optimize the constrained regression functions that can get the best combinations of the activators, Finally. The results show that the compressive strengths (28d, 7d, 3d) of new backfill cementing materials are 6.73MPa, 4.03MPa and 1.00MPa when the lime, desulfurization ash, mirabilite, NaOH and slag are 7.05%, 16.32%, 3.062%, 1.08% and 72.48%. The optimal results conform to the requirements of the Jinchuan mine filling strength, which lays a foundation for further industrial test of new backfill cementing materials in Jinchuan mine.

• Periodical: Advanced Materials Research (Volumes 962-965)
• Pages: 1100-1105
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.962-965.1100
• Online since: June 2014
• Authors: Mao Hui Li, Zhi Qiang Yang, Qian Gao*, You Tuan Wang
• Keywords: JinChuan Mine, New Backfill Cementing Materials, Optimization Algorithm, Rod Milling Sand

References

[1] Chuanqing Zhao, Nailian Hu. (In Chinese)Application and Practice of New Filling Material in Jiaojia Gold Mine[J]. Nonferrous Metals, 2008, 60(2): 129-134.

[2] Liping Zhu, Wen Ni, Di Huang et al. (In Chinese) Whole-tailings backfilling materials with fly ash[J]. Journal of University of Science and Technology Beijing, 2011, 33(10): 1190-1196.

[3] Zhenghui Wang, Qian Gao. (In Chinese)Study on Mechanism and Stability of Filling in Stoping cemented Fill Method [J]. Metal mine, 2003(10): 18-20.

[4] Yunpeng Yang, Qian Gao. (In Chinese) Experimental study of a new commenting material using tailings [J]. Chinese Journal of Rock Mechanics and Engineering, 2013, 31 (supp 1): 2906-2911.

[5] Lu Dong, Qian Gao, Shiqing Nan, et al. (In Chinese) Performance and hydration mechanism of new super fine cemented whole-tailings backfilling materials [J]. Journal of Central South University (Science and Technology), 2013, 44(4): 1571-1577.

[6] Shuhua Zhai, Qian Gao. (In Chinese) Application of genetic programming on predicting maximum surface subsidence due to mining [J]. Journal of China coal Society, 2007, 32(3): 239-242.

[7] Zhuo Dong, Yongli Zhu, Zibin Hu. (In Chinese)Oil-immersed transformer fault diagnosis based on PCA and GP [J]. Electric Power Science and Engineering, 2011, 27(9): 31-34.

[8] Bin Yang, Lichun Kuang, Zhongchun Sun et al. (In Chinese)Prediction of reservoir water saturation by genetic programming [J]. Journal of Chengdu University of technology (Science & Technology Edition), 2006, 33(2): 209-213.

[9] Aiguang Niu. Study on improvement and application of genetic programming [D]. (In Chinese)University of Science and Technology of China, (2006).

[10] Guohua Liu, Hong Bao, Wenchao Li. (In Chinese) A Genetic Algorithm in MATLAB [J]. Application research of computers, 2001, 8: 80-82.

[11] Yong Liu, Baokun Liu, Guangquan Li. (In Chinese) Realization and application of genetic algorithm toolbox based on MATLAB [J]. Journal of Tianjin University, 2001, 34(4): 490-494.