Influence of Isothermal Forging Temperature on Microstructure and Tensile Properties of Ti-5.8Al-4.0Sn-4.0Zr-0.7Nb-0.4Si-1.5Ta Near-α Titanium Alloy

Abstract:

Article Preview

The microstructures and room temperature and 600°C tensile properties of Ti-5.8Al-4.0Sn-4.0Zr-0.7Nb -0.4Si-1.5Ta alloy after isothermal forging have been studied. The forging temperature range was from 850°C to 1075°C, and the constant strain rate of 8×10-3/S-1 was adopted. With the increase of forging temperature, the volume fraction of primary α phase decreased and the lamellar α phase became thicker when the temperatures were in range of 850°C -1040°C; The grain size became uneven and the α phase had different forms when the forging temperature was 1040°C and 1075°C respectively; The tensile strength was not sensitive to the temperature and the most difference was within 20MPa. Tensile strength and yield strength attained to the maximum when temperature was 1020°C; the ductility decreased with the increase of forging temperature, and this trend became more obvious if forging temperature was above the β-transus temperature.

Info:

Periodical:

Advanced Materials Research (Volumes 97-101)

Edited by:

Zhengyi Jiang and Chunliang Zhang

Pages:

153-157

Citation:

T. Wang et al., "Influence of Isothermal Forging Temperature on Microstructure and Tensile Properties of Ti-5.8Al-4.0Sn-4.0Zr-0.7Nb-0.4Si-1.5Ta Near-α Titanium Alloy", Advanced Materials Research, Vols. 97-101, pp. 153-157, 2010

Online since:

March 2010

Export:

Price:

$38.00

[1] R.R. Boyer: Mater. Sci. Eng. A Vol. 213 (1996), p.103.

[2] Minmin Wang, Yongqing Zhao and Lian Zhou: Rare Metal Materials and Engineering Vol. 31 (2002), p.135 (In Chinese).

[3] H. Mishra, P. Ghosal, T.K. Nandy and P.K. Sagar: Mater. Sci. Eng. A Vol. 399 (2005), p.222.

[4] Potozky P, Maier HJ and Christ H-J: Metall. Mater. Trans. A Vol. 29(1998), p.2995.

[5] Jun Zhang, Dong Li: The α2 phase in the High Temperature Titanium. ( Northeast University Press, China 2002) (In Chinese).

[6] S. Shah: Isothermal and Hot-Die Forging, Forming and Forging, ASM Handbook, Vol. 14, 1988, p.150.

[7] Y.G. Zhou, W.D. Zeng and H.Q. Yu: Mater. Sci. Eng. A Vol. 393 (2005), p.204.

[8] Jiao Luo, Miaoquan Li, Hongsi Pan and Shaobo Su: The Chinese Journal of Nonferrous Metals. Vol. 17 (2007), p.53(In Chinese).

[9] Aiming Xiong, Shenhui chen, et al: Rare Metal Materials and Engineering Vol. 32 (2003), p.447(In Chinese).

[10] Huiqin Chen, Haozhuan Lin, Ling Guo and Chunxiao Cao: Journal of Materials Engineering 1 (2007), p.60(In Chinese).

[11] Xiyan Zhang, Yongqin Zhao and Chenguang Bai: Titanium alloys and applications. (Chemical Industry Press, China 2005) (In Chinese).

[12] Mengyi Hao, Jianming Cai and Juan Du: Journal of Materials Engineering 7 (2003), p.20(In Chinese).

[13] Zekun Yao, Hongzhen Guo and Chen Yang: Rare Metal Materials and Engineering Vol. 32 (2003), p.538(In Chinese).

[14] Zekun Yao, Hongzhen Guo and Zuwu Su: Rare Metal Materials and Engineering Vol. 29 (2000), p.340(In Chinese).

[15] M.A. Greenfield and H: Margolin. Metall. Trans. 3 (1972) p.2649.

[16] Terlinde G and Luetjering G: Metall. Trans. A Vol. 13 (1982) p.1283.