Influences of Turning Parameters on Surface Roughness in Ultra-Precision Diamond Turning Processing Technology

Abstract:

Complex surfaces can be manufactured by using ultra-precision diamond turning processing technology, whereas the surface roughness of the workpiece is influenced by many factors, the relationships among these factors are very complex, and little research reports are found. In this paper, influences of the turning parameters on surface roughness are investigated and analyzed under different related parameters such as spindle speed, feed rate and depth of cut. The result shows that the slotted tool could obtain better surface roughness than the non-slotted tool under the same conditions. Through changing the magnetic field intensity, finishing gap, rotational speed of tool and finishing time, an orthogonal experiment is conducted to obtain the optimal finishing process parameters.

• Periodical: Advanced Materials Research (Volume 978)
• Pages: 52-55
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.978.52
• Online since: June 2014
• Authors: Kong Lian Xu*, Zan Wu Tan
• Keywords: Surface Roughness (SR), Turning Parameters, Ultra-Precision Diamond Turning Processing Technology

References

[1] Liu C F, Pan C T, Chen Y C, et al. Design and fabrication of double-sided optical film for OLED lighting[J]. Optics Communications, 2013, 291: 349-358.

DOI: 10.1016/j.optcom.2012.10.066

[2] Davies M A, Evans C J, Patterson S R, et al. Application of precision diamond machining to the manufacture of micro-photonics components[C]. Proc. of SPIE. Bellingham, United States. 2003, 5183: 94-108.

[3] Kwok T C, Cheung C F, Kong L B. Analysis of surface generation in ultra-precision machining with a fast tool servo[J]. Proc. IMechE Part B: J. Engineering Manufacture, 2009, 224: 1351-1367.

DOI: 10.1243/09544054jem1843

[4] Liu Q, Zhou X Q, Xu P Z, et al. A flexure-based long stroke fast tool servo for diamond turning[J]. The International Journal of Advanced Manufacturing Technology, 2012, 59: 859-867.

DOI: 10.1007/s00170-011-3556-3

[5] Brinksmeier E, Riemer O, Glabe R, et al. Submicron functional surfaces generated by diamond machining[J]. CIRP Annals-Manufacturing Technology, 2010, 59(1): 535-538.

DOI: 10.1016/j.cirp.2010.03.037

[6] Dow T A, Miller M H, Falter P J. Application of a fast tool servo for diamond turning of nonrotationally symmetric surfaces[J]. Precision Engineering, 1991, 13(4): 243-250.

DOI: 10.1016/0141-6359(91)90001-y

[7] Miller M H, Garrard K P, Dow T A, et al. A controller architecture for integrating a fast tool servo into a diamond turning machine[J]. Precision Engineering, 1994, 16(1): 42-48.

DOI: 10.1016/0141-6359(94)90017-5

[8] Yuan Z J, Zhou M, Dong S. Effect of Diamond Tool Sharpness on Minimum Cutting Thickness and Cutting Surface Integrity in Ultraprecision Machining[J]. Journal of Materials Processing Technology, 1996, 62(1): 327-330.

DOI: 10.1016/s0924-0136(96)02429-6

[9] C F Cheung, W B Lee. A Theoretical and Experimental Investigational of Surface Roughness Formation in Ultra-precision Diamond Turning[J]. International Journal of Machine Tools & Manufacture, 2000, (40): 979-1002.

DOI: 10.1016/s0890-6955(99)00103-0

[10] Colafemina J P, Jasinevicius R G, Duduch J G. Surface Integrity of Ultra-precision Diamond Turned Ti (commercially pure) and Ti Alloy (Ti-6Al-4V)[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture June 1, 2007, 22: 999-1006.

DOI: 10.1243/09544054jem798