Mechanical Behavior of the Cement Mortar with High Amount of Municipal Solid Waste Incineration (MSWI) Bottom Ash as an Alternative Aggregate

Kirill Polozhiy; Martin Keppert; Marcel Jogl; Robert Černý

doi:10.4028/www.scientific.net/AMR.982.74

Paper Titles

Determination of Hygric Properties of Hollow Brick Block as a Function of Moisture Content
p.54

Production and Use of the Textile Reinforced Concrete
p.59

Moisture Migration in High Strength Concrete
p.63

Application of Digital Optical Microscopy in Materials and Mechanical Engineering: Optical Porosimetry and Crack Detection
p.68

Mechanical Behavior of the Cement Mortar with High Amount of Municipal Solid Waste Incineration (MSWI) Bottom Ash as an Alternative Aggregate
p.74

A Comparative Study on Thermal Properties of Two Types of Concrete Containing Fine Ceramic Waste and Burnt Clay Shale as a Supplementary Material
p.79

Numerical Study of the Influence of Internal Blast on the Earth Covered Composite Arch
p.84

Heat and Water Vapor Transport Properties of Selected Commercially Produced Plasters
p.90

Fracture Surface Measurement of Concrete with Respect to Loading Speed
p.94

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 982Mechanical Behavior of the Cement Mortar with High...

Mechanical Behavior of the Cement Mortar with High Amount of Municipal Solid Waste Incineration (MSWI) Bottom Ash as an Alternative Aggregate

Abstract:

The aim of this study was to find out an application of the municipal waste incineration materials and try to use them as a replacement for the natural ones. MSWI (Municipal Solid Waste Incineration) bottom ash (BA) was used as partial/total replacement of siliceous sand in CEM II based mortar. Three size fractions of BA were used with respect to replace the siliceous sand in corresponding way. There were designed 5 mixtures with increasing replacement of siliceous sand by 25 % each. The water/cement ratio was decided to be taken according to the constant consistence of the mortar. The bulk density, compressive strength and bending strength of the mortars were decreasing with growing content of BA.

You might also be interested in these eBooks

Mechanical, Thermal and Hygric Properties of Buildings Materials

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 982)

Pages:

74-78

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.982.74

Citation:

Cite this paper

Online since:

July 2014

Authors:

Kirill Polozhiy*, Martin Keppert, Marcel Jogl, Robert Černý

Keywords:

Bottom Ash, Cement Mortar, Mechanical Property, Municipal Solid Waste Incineration

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] L. Biganzoli, A. Iiyas, M. van Praagh, K. M. Persson, M. Grosso: Aluminium recovery vs. Hydrogen production as resource recovery options for fine MSWI bottom ash fraction; WASTE MANAGEMENT, Volume: 33 (2013) 1174-1181.

DOI: 10.1016/j.wasman.2013.01.037

Google Scholar

[2] K. Polozhiy: Basic and thermal properties of concrete from MSWI slag; Magister thesis; (2013).

Google Scholar

[3] K. Lundtorp, D.L. Jensen, M.A. Sorensen, H. Mosbaek, T.H. Christensen: On-site treatment and landfilling of MSWI air pollution control residues, JOURNAL OF HAZARDOUS MATERIALS, Volume: 97 (2002) 59-70.

DOI: 10.1016/s0304-3894(02)00243-1

Google Scholar

[4] R. del Valle-Zermeño, J. Formosa, J.M. Chimenos, M. Martínez, A.I. Fernández: Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material; WASTE MANAGEMENT, Volume: 33 (2012) 621-627.

DOI: 10.1016/j.wasman.2012.09.015

Google Scholar

[5] A.P. Bayuseno, W.W. Schmahl: Understanding the chemical and mineralogical properties of the inorganic portion of MSWI bottom ash; WASTE MANAGEMENT, Volume: 30 (2010) 1509-1520.

DOI: 10.1016/j.wasman.2010.03.010

Google Scholar

[6] M. Keppert, Z. Pavlík, J. Žumár, R. Černý: Durability of mortar with high content of Municipal Solid Waste Incineration bottom ash; International Proceedings of Computer Science & Information Tech, Volume: 28 (2012) 137.

DOI: 10.4028/www.scientific.net/amr.584.350

Google Scholar