Electronics in Textiles – Adhesive Bonding Technology for Reliably Embedding Electronic Modules into Textile Circuits

Abstract:

The interconnection of electronics and textile circuits is still a main challenge for the fabrication of reliable smart textiles. This paper investigates the thermoplastic adhesive bonding technology. Electronic modules are bonded to textile substrates with a thermoplastic non-conductive adhesive (NCA) film. The modules are placed onto textile circuits with an NCA-film in-between. By applying pressure and heat, the adhesive melts and contact partners touch. Subsequently cooling solidifies the NCA resulting in an electrical and mechanical contact of the electronic module and the textile circuit. This paper shows the suitability of this technology for knitted, woven, non-woven and embroidered fabrics with metal coated yarns as well as with litz-wires as conductors. Besides, it shows that the interconnection process works well with thermoplastically insulated conductors. In addition, the design of interposers has been improved in respect to contact formation and miniaturization compared to previous publications. The pitch of the contact pads is set to 1.27 mm. A textile display was realized with smart RGB-Pixels, which are controlled by an I²C-bus on a quadrupolic woven substrate. It demonstrates the applicability and the potential of this technology.

• Periodical: Advances in Science and Technology (Volume 85)
• Pages: 1-10
• DOI: https://doi.org/10.4028/www.scientific.net/AST.85.1
• Online since: September 2012
• Authors: Malte von Krshiwoblozki, Torsten Linz, Andreas Neudeck, Christine Kallmayer
• Keywords: Connecting Insulated Wires, Electronic in Textiles, NCA-Bonding, Textile Integrated Electronics, Thermoplastic Adhesive Bonding

References

[1] L. Buechley, M. Eisenberg, Fabric PCBs, electronic sequins, and socket buttons: Techniques for E-textile craft. Journal of Personal and Ubiquitous Computing, 13, 133–150. (2007)

DOI: 10.1007/s00779-007-0181-0

[2] C. Kallmayer, R. Pisarek, A. Neudeck, S. Cichos, S. Gimpel, R. Aschenbrenner, & H. Reichl, New Assembly Technologies for Textile Transponder Systems, Paper presented at the IEEE Electronic Components and Technology Conference, New Orleans. (2003)

DOI: 10.1109/ectc.2003.1216432

[3] T. Linz, R. Vieroth, C. Dils, M. Koch, T. Braun, K. F. Becker, C. Kallmayer & S.M. Hong, Embroidered interconnections and Encapsulation for Electronics in Textiles for Wearable Electronics Applications, In Advances in science and technology, Vol. 60, pp.85-94, Durnten-Zurich: Trans Tech Publications Inc. Retrieved from, www. Scientific.net. (2008)

[4] T. Linz, E. P. Simon & H. Walter, Modeling embroidered contacts for electronics in textiles, Journal of the Textile Institute. (2011)

DOI: 10.1080/00405000.2011.597568

[5] I. Locher, Technologies for System-on-Textile Integration, Dissertation submitted to the Swiss Federal Institute of Technology. (2006)

[6] Information on http://www.insitex.de/images/stories/insitex_flyer_1_lowres.pdf from the German project InSiTeX (May 21th 2012)

[7] E.P. Simon, C. Kallmayer, R. Aschenbrenner, K.D. Lang, Novel Approach for Integrating Electronics into Textiles at Room Temperature using a Force-Fit Interconnection, IMAPS IEEE 18th EMPC, Brighton. (2011)

[8] H. Zhang, X. Tao, T. Yu, S. Wang, Conductive knitted fabric as large-strain gauge under high temperature, Sensors and Actuators, A 126, pp.129-140. (2006)

DOI: 10.1016/j.sna.2005.10.026

[9] T. Linz, M. v. Krshiwoblozki, H. Walter, "Novel Packaging Technology for Body Sensor Networks Based on Adhesive Bonding", BSN, Singapore. (2010)

DOI: 10.1109/bsn.2010.56

[10] T. Linz, M. v. Krshiwoblozki, H. Walter & P. Foerster, Contacting electronics to fabric circuits with nonconductive adhesive bonding, Journal of the Textile Institute. (2012)

DOI: 10.1080/00405000.2012.664867

[11] R. Holm, Electrical Contacts: Theory and application, 4th ed., Berlin, Springer. (1967)

[12] P. Foerster, T. Linz, M. v. Krshiwoblozki, H. Walter, C. Kallmayer, R. Aschenbrenner, NCA Flip-Chip Bonding with Thermoplastic Elastomer Adhesives – Fundamental Failure Mechanisms and Opportunities of Polyurethane Bonded NCA-Interconnects, 13th EPTC, Singapore. (2011)

DOI: 10.1109/eptc.2011.6184421

[13] D. Manessis, L. Boettcher, A. Ostmann, S. Karaszkiewicz, H. Reichl, Breakthroughs in chip embedding technologies leading to the emergence of further miniaturised system-in-packages, 4th IMPACT Conference, Taipeh. (2009)

DOI: 10.1109/impact.2009.5382147