Paper Titles
Synthesis and Properties of Silica Aerogel by Using Acid Silica Sol and TEOS as Silicon Sources
p.1509
Thermal Shock Resistance and Ablation Behavior of TiB2-Cu-Ni Composite via Combustion Synthesis
p.1513
A Novel Approach to Prepare Ni-Coated TiB2 Cermet
p.1517
Microstructure and Properties of (Ti,W)(C,N)/(Ni,Mo) Cermets after a Heat-Treatment at High Nitrogen Pressure
p.1521
Effect of Cr2C3 Addition on Microstructure and Mechanical Properties of Ti(CN)-Based Cermets
p.1524
Residual Stress Field of Ellipsoidal Ceramic Particles Ni-Base Alloy Composite Coating
p.1527
FEM Analysis on Thermal Stress of Desulphurization Injection Lance
p.1531
Investigation on the Porous Biomaterial for Bone Reconstruction with Addition of Bio-Mimetic Nano-Sized Inorganic Particles
p.1534
Inhibitory Effect of Synthetic Nano-Hydroxyapatite on Dental Caries
p.1538

Effect of Cr2C3 Addition on Microstructure and Mechanical Properties of Ti(CN)-Based Cermets

Article Preview

Abstract:

In this paper, the Ti(CN)-based cermets were fabricated with ultrafine Ti(CN) powders, additives WC, Cr2C3 and Mo, metal binder Ni by vacuum sintering and HIP treatment. The composition of the mixture was Ti(CN)-10Mo-20WC-xCr2C3-20Ni. Effect of Cr2C3 addition on microstructure and mechanical properties was investigated. Results indicated that with increasing Cr2C3 content, the relative densities after vacuum sintering decreased and the grain sizes of cermets increased. Cr2C3 addition to the cermets improved the hardness but had some negative effect on the performance of bending strength.

You might also be interested in these eBooks
High-Performance Ceramics IV View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 336-338)

Pages:

1524-1526

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.336-338.1524

Citation:

Cite this paper

Online since:

April 2007

Authors:

Xian Juan Ni, Long Hao Qi, Wei Pan

Keywords:

Cr2C3, Mechanical Property, Ti(c,n)-based Cermet

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2007 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] P. Ettmayer, H. Kolaska, W. Lengauer, et al.: Int. J. Ref. Met. Hard Mat. Vol. 13(1995), p.343.

Google Scholar

[2] S.Y. Ahn and S. Kang: J. Am. Ceram. Soc. Vol. 83 (2000), p.1489.

Google Scholar

[3] S. Zhang and J. Sun: Mater. Sci. Eng. A Vol. 163 (1993), p.141.

Google Scholar

[4] F. Qi and S. Kang: Mater. Sci. Eng. A Vol. 251 (1998), p.276.

Google Scholar

[5] S. Mun and S. Kang: Powder Metall. Vol. 42 (1999), p.251.

Google Scholar

[6] L. He, C. Huang, Y. Liu and H. Liu: J. Chin. Ceram. Soc. Vol. 31(2003), p.324. Fig. 3 Bending strength of the cermets Fig. 4 Vickers hardness of the cermets.

Google Scholar