Strength Analyses of Interference Fit between Ceramic Column and Metal Sleeve

Xin Li Tian; Xiu Jian Tang

doi:10.4028/www.scientific.net/KEM.368-372.1628

Paper Titles

Interface Microstructure of TiC Cermets/Steel Explosive Cladding Plate
p.1614

On the Interface between Porcelain and Titanium
p.1618

Wettability of Graphite/Ni plus Cr System
p.1621

Stiffness of Cermets Containing Interfacial Arc-Microcracks
p.1625

Strength Analyses of Interference Fit between Ceramic Column and Metal Sleeve
p.1628

Corrosion Behavior of SrZrO₃@SiO₂ Composite in Sodium Hydroxide
p.1630

Microstructure and Thermal Shock Resistance of LaPO₄-ZrO₂
p.1633

Preparation and Characterization of Coated ZnO Nanoparticles
p.1636

Effect of Heat Treatment on Specific Surface Area of Si-C-O Fibers
p.1639

HomeKey Engineering MaterialsKey Engineering Materials Vols. 368-372Strength Analyses of Interference Fit between...

Strength Analyses of Interference Fit between Ceramic Column and Metal Sleeve

Abstract:

Ceramic column and metal sleeve are often used together by interference fit. The stress distribution in brittle ceramics is different from that in metal. Two important factors for their connection strength such as interference value and the length of envelope surface are discussed in this paper. The results showed that interference value is the decisional factor for the strength of interference fit between ceramic column and metal sleeve, while the length of envelope surface impacts it slightly.