Laser Assisted Cutting of Abrasion Resistant Steel

Abstract:

Abrasion resistant (AR) steels offer excellent hardness and strength properties in applications as mining and earth moving machines. As an outcome of high hardness AR steels can be used to produce durable, light-weight and energy saving products. However, their mechanical processing can be challenging as the hardness of the material approaches the hardness of the tooling used. This places high forces on cutting tools and machines, which, in turn, increases wear and causes early breakdown. This research examines whether the laser treatment of AR steels can be used to aid guillotine shearing. The tested material was abrasion resistant steel with hardness of 400 HBW. Two different laser treatments were examined: local laser heat treatment and laser milling. The aim of laser heat treatment was to change the original martensitic microstructure locally into weaker structure, beneficially for shearing. Narrow grooves were made along the cut line by laser milling, and then the plate cut along them. The effect of local laser heat treatment and the fracture initiating effect of the groove was evaluated from the cutting force. Microhardness tests and micro photos were taken after laser heat treatments. The results indicated that the shearing force of AR steels can be reduced up to 25% with the aid of laser heat treatments. Laser milling had only a slight effect to the shearing force of up to about 8%. In addition, the relative depth of the laser milled groove is estimated at the same range, thus force reduction is mainly due to reduction of material thickness.

• Periodical: Key Engineering Materials (Volumes 504-506)
• Pages: 1371-1376
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.504-506.1371
• Online since: February 2012
• Authors: Jani Kantola, Kari Mäntyjärvi, Jussi A. Karjalainen
• Keywords: Abrasion Resistant Steel, Guillotine Shear, Laser Milling, Laser-Assisted Process, Local Heat Treatment

References

[1] Mäntyjärvi, Kari & Karjalainen Jussi A. & Leiviskä Anu & Keskitalo Markku & Mäkikangas Jarmo & Ojala Jari 2007. Laser-assisted process – More speed and less force for manufacturing processes, In: Kujanpää V. & Salminen A. (Ed.). 11th Nolamp Conference in Laser Processing of Materials. Lappeenranta, Finland. pp.544-553. ISBN 978-952-214-412-6.

[2] Keskitalo Markku & Mäntyjärvi Kari & Mäkikangas Jarmo & Karjalainen Jussi A. & Leiviskä Anu & Heikkala Jouko. 2007. Local laser heat treatments of ultra-high strength steel, In: Kujanpää V. & Salminen A. (Ed.). 11th Nolamp Conference in Laser Processing of Materials. Lappeenranta, Finland. pp.536-543. ISBN 978-952-214-412-6.

[3] Mäntyjärvi, Kari & Keskitalo, Markku & Karjalainen, Jussi A. & Leiviskä, Anu & Heikkala, Jouko & Mäkikangas, Jarmo. 2007. Laser-Assisted Bending. International Journal of Key Engineering Materials. Vol. 344. pp.235-241.

DOI: 10.4028/www.scientific.net/kem.344.235

[4] Mäntyjärvi, Kari & Leiviskä, Anu & Karjalainen, Jussi A. & Keskitalo, Markku & Heikkala, Jouko & Mäkikangas, Jarmo. 2007. Local Laser Heat Treatments in Bending Ultra-High Strength Steel. Proceeding of the 11th NOLAMP Conference in Laser Processing of Materials. Lappeenranta, Finland. pp.291-297.

[5] Neugebauer, Reimund & Schffler, Sören & Poprawe, Reinhart & Weisheit, Andreas. 2009. Local Laser Heat Treatment of Ultra High Strength Steels to Improve Formability. Production Engineering, Vol. 3, Numbers 4-5. pp.347-351.

DOI: 10.1007/s11740-009-0186-9

[6] Merklein, M. & Geiger, M. 2002. New Materials and Production Technologies for Innovative Lightweight Constructions. Journal of Materials Processing Technology Vol. 125-126. pp.532-536. ISSN 0924-0136.

DOI: 10.1016/s0924-0136(02)00312-6

[7] Kratky, A. & Liedl, G. & Bielak, R. 2004. LADD – Laser Assisted Deep Drawing. Proceedings of the International Conference LANE 2004. Erlangen, Germany. pp.1125-1134. ISBN 3-87525-202-0.

[8] Brecher, Christian & Emonts, Michael & Eckert, Markus. 2011. Laser-Assisted Sheet Metal Working of High Strength Steels in Serial Production. Physics Procedia Vol. 12, Part A. Laser in Manufacturing 2011 – Proceeding of the Sixth International WLT Conference on Lasers in Manufacturing. pp.617-626. ISSN 1875-3892.

DOI: 10.1016/j.phpro.2011.03.078

[9] Emonts, Michael & Brecher, Christian. 2010. Laser-Assisted Shearing of Stainless Steel and Spring Steel Plates with the Use of a Laser Scanner System – New Hybrid Production Technology for the Sheet Metal Industry. Physics Procedia Vol. 5, Part B. Laser Assisted Net Shape Engineering 6, Proceeding of the LANE 2010, Part 2. pp.273-283. ISSN 1875-3892.

DOI: 10.1016/j.phpro.2010.08.053

[10] Taulavuori, Tero & Kujansuu, Jouni & Asbegren, Pasi & Kangas, Pekka. 2006. A Method for Determining the Quality of Mechanically Cut Edges: the Cutting Edge Factor (CEF). Welding and Cutting 5, No. 5. pp.262-263.