Development of Engobe Samples for Dan Kwian Ceramic Body

Luangnaem, Chaisiri; Sathonsaowaphak, Apha; Kamon-In, Onlamee; Pimraksa, Kedsarin

doi:10.4028/www.scientific.net/KEM.608.325

Paper Titles

Effect of Alumina Source and Soaking Time on Properties of Refractory Mortar Using as Slumping Mold
p.301

The Simple Method for Increasing Chemical Stability of Glass Bottles
p.307

Investigation of Melting Behavior of Low-Enthalpy Glass Batches
p.311

Crack Evolution from Ballistic Threats in Laminated Glass
p.316

Development of Engobe Samples for Dan Kwian Ceramic Body
p.325

Using Natural Fibers in Forming the Body of Ceramic Lamp
p.331

Underglaze Tissue Printing for Ceramic Artists, a Collaborative Project to Re-Appraise 19th Century Printing Skills
p.335

Using the Polka Dot Technique of Color Slip for Ceramic Decorative
p.341

The Development of Pottery Products from Nong Suea Clay
p.346

HomeKey Engineering MaterialsKey Engineering Materials Vol. 608Development of Engobe Samples for Dan Kwian...

Development of Engobe Samples for Dan Kwian Ceramic Body

Abstract:

This paper developed engobe samples for Dan Kwian ceramic body. Kaolinite clay, zirconium silicate, sodium feldspar and quartz were used as raw materials which were varied to obtain various samples. Mix proportion was designed by the square sampling method to obtain 16 samples. All samples were milled and fired at 1200°C under oxidation and reduction atmospheres. The results showed that the suitable engobe composition of kaolinite clay 10 wt%, zirconium silicate 10 wt%, sodium feldspar 40 wt% and quartz 40 wt% to produce good surface appearance for Dan Kwian ceramics. Engobe surfaces and the body had no defect both in the oxidation and reduction atmospheres. The color and engobe surface were opaque white and glossy, respectively.

Info:

Periodical:

Key Engineering Materials (Volume 608)

Edited by:

Somnuk Sirisoonthorn, Sirithan Jiemsirilers, Siriphan Nilpairach, Thanakorn Wasanapianpong, Pornnapa Sujaridworakun and Nutthita Chuankrerkkul

Pages:

325-330

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.608.325

Citation:

Cite this paper

Online since:

April 2014

Authors:

Chaisiri Luangnaem, Apha Sathonsaowaphak*, Onlamee Kamon-In, Kedsarin Pimraksa

Keywords:

Dan Kwian Ceramic, Engobe, Kaolin, Quartz, Sodium Feldspar, Zirconium Silicate

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] C.W. Parmelee, C.G. Harman, Ceramic Glaze, third ed., United State, (1973).

[2] A. Moreno, E. Bou, M.J. Cabrera, P. Quereda, Zirconium silicate opacification mechanism in ceramic engobes in: Cámara Oficial de Comercio, Industria y Navegación, QUALICER(Eds), Qualicer 98: V World Congress on Ceramic Tile Quality, [8/11 March 1998, Castellon/Spain; General Conferences and Communications], Vol. 2, Spain, 1998, pp.29-31.

[3] A.I. Nestertsov, Underglaze engobe for ceramic facing tiles, Glass Ceram. 61 (2004) 413-414.

DOI: 10.1007/s10717-005-0015-3

[4] N. Martinez, E. Papin, A Formulated Solution for Zircon Substitution - ALTEO's ARZ Aluminas, Process Engineering, 90 (2013) 35-36.

[5] O.C. Pereira, A.M. Bernardin, Ceramic colorant from untreated iron ore residue, J. Hazard. Mater. 223-234 (2012) 103-111.

DOI: 10.1016/j.jhazmat.2012.06.057