Experimental Study of Laser Direct Joining of Metal and Carbon Fiber Reinforced Nylon

Abstract:

This paper presents an experimental study to evaluate the feasibility, characteristics and mechanism of laser direct joining between metal and carbon fiber reinforced plastic (PA66CF20). This study presents a method to improve the joint strength of the metal-polymer hybrid joint. The investigation study effects of process parameters (laser power and travelling speed) on the quality of joining joint. Macroscopic morphology of joint and PA66CF20 melting region closed to the interface were observed in this study. XPS analysis shows that Ti-C and Ti-O chemical bonding were produced between titanium alloy and plastic. Cross-sectional photo showed the melted polymer flowed into micro-cavity of metal surface caused by roughness of metal and thus formed mechanical bonding. Finally, the titanium alloy surface was structured in four different surface textures using a pulsed laser. Then the metal was joined with the plastic. The result shows that the joint strength of metal after laser-structured joining with plastic had been improved greatly.

• Periodical: Key Engineering Materials (Volume 620)
• Pages: 42-48
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.620.42
• Online since: August 2014
• Authors: Chuang Huang, Xiao Wang, Yan Wei Wu, Dong Dong Meng, Hui Xia Liu
• Keywords: CFRP, Joining Mechanism, Laser Direct Joining, Laser Structuring, Metal

References

[1] E. Wadahara and A. Kitano: Sen'i Gakkaishi, Vol. 64 (2008) No.9, pp.295-301.

[2] R. Romano, J. Fiori and U. Mercurio: Composite Structures, Vol. 88 (2009) No.3, pp.333-341.

[3] G. Casalino, F. Curcio and F. Memola Capece Minutolo: Journal of Materials Processing Technology, Vol. 167 (2005) No.2-3, p.422–428.

DOI: 10.1016/j.jmatprotec.2005.05.031

[4] O. Schauerte: Advanced Engineering Materials, Vol. 5 (2003) No.6, pp.411-418.

[5] B. Kolesnikov, L. Herbeck and A. Fink: Composite Structures, Vol. 83 (2008) No.4, pp.368-380.

[6] S.B. Kumara, I. Sridhara, S. Sivashanker, S.O. Osiyemib and A. Bag: Materials Science and Engineering B, Vol. 132 (2006) No.1-2, pp.113-120.

[7] F.k Balle, G. Wagner and D. Eifler: Advanced Engineering Materials, Vol. 11 (2009) No.1-2, pp.35-39.

[8] F. Yusof, Y. Miyashita, N. Seo, Y. Mutoh and R. Moshwan: Science and Technology of Welding and Joining, Vol. 17 (2012) No.7, pp.544-549.

DOI: 10.1179/136217112x13408696326530

[9] K. W. Jung, Y. Kawahito and S. Katayama: Science and Technology of Welding and Joining, Vol. 16 (2011) No.8, pp.676-680.

[10] K.W. Jung, Y. Kawahito, M. Takahashi and S. Katayama: Materials and Design, Vol. 47 (2013), pp.179-188.

[11] S. Katayama and Y. Kawahito: Scripa Materialia, Vol. 59 (2008) No.12, pp.1247-1250.

[12] M. Wahba, Y. Kawahito and S. Katayama: Journal of Materials Processing Technology, Vol. 211 (2011) No.6, pp.1166-1174.

[13] P. S. Ho, P. O. Hahn and J. W. Bartha, et al: Journal of Vacuum Science & Technology A, Vol.3 (1985) No.3, p.739.

[14] H.F. Franzen and M.X. Umaña: Journal of Solid State Chemistry, Vol.18 (1976) No.4, p.363–368.

[15] C. Girardeauxa and  E. Drueta: Journal of Electron Spectroscopy and Related Phenomena, Vol.70 (1994) No.1, pp.11-21.