Experimental Investigation of Metallic Fiber-Reinforced Adhesively Bonded Joints under Bending

Nima Razavi; F. Berto

doi:10.4028/www.scientific.net/KEM.754.252

Paper Titles

A Finite Element Based Analysis of Double Strap Bonded Joints with CFRP and Aluminium
p.237

RETRACTED: A Study on the Fatigue Behavior of Hot Dip Galvanized Steel Connections
p.241

RETRACTED: Fatigue Strength of Hot-Dip Galvanized Welded Steel Connections
p.244

Fracture Resistance of Flash Welded and Laser Welded Butt Joints in a Microalloyed HSLA Steel
p.248

Experimental Investigation of Metallic Fiber-Reinforced Adhesively Bonded Joints under Bending
p.252

The Effect of Interface Geometry on the Mechanical Behavior of Adhesive Joints
p.256

Effect of Surface Morphologies of Interface on Adhesion Strength in a Metal/Epoxy Joint
p.260

Effect of Temperature on Fatigue Strength Characteristic and Fatigue Mechanism in Laser Welded Dissimilar Stainless Steels Joint
p.264

Evaluation of Residual Stresses in Butt Welded Joint of Dissimilar Material by FEM
p.268

HomeKey Engineering MaterialsKey Engineering Materials Vol. 754Experimental Investigation of Metallic...

Experimental Investigation of Metallic Fiber-Reinforced Adhesively Bonded Joints under Bending

Abstract:

In the current paper, the geometric and material parameters of metal fibers utilized for strengthening adhesively bonded single lap joints under flexural loading were investigated by using experimental investigations. According to the test results, incorporating metal fibers in the adhesive layer of a bonded joint can have a significant impact on the flexural load bearing of the joint. The distance between the fibers and also the fibers orientation were considered as the key parameters in this research. It was concluded that the load bearing of the joint can be improved by reducing the distance between the fibers and the highest failure loads were obtained for the joints reinforced by fibers in the longitudinal direction.

You might also be interested in these eBooks

Advances in Fracture and Damage Mechanics XVI

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 754)

Pages:

252-255

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.754.252

Citation:

Cite this paper

Online since:

September 2017

Authors:

Nima Razavi*, F. Berto

Keywords:

Metal Fibers, Three Point Bending, Toughened Adhesives

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] G. Gkikas, D. Sioulas, A. Lekatou, N.M. Barkoula and A.S. Paipetis: Mater. Des. Vol. 41 (2012), p.394.

DOI: 10.1016/j.matdes.2012.04.052

Google Scholar

[2] M.R. Ayatollahi, A. Nemati Giv, S.M.J. Razavi and H. Khoramishad: J. Adhes. (In Press) (.

Google Scholar

[3] M. Imanaka, S. Motohashi, K. Nishi, Y. Nakamura and M. Kimoto: Int. J. Adhes. Adhes. Vol. 29 (2009), p.119.

Google Scholar

[4] R. Hunter, J. Moller, A. Vizan, J. Perez, J. Molina and J. Leyrer: J. Adhes. (In Press) (.

Google Scholar

[5] R. Kahraman, M. Sunar and B. Yilbas, J. Mater. Process. Technol. Vol. 205 (2008), p.183.

Google Scholar

[6] R. Kilik, R. Davies and S.M.H. Darwish: Int. J. Adhes. Adhes. Vol. 9 (1989), p.219.

Google Scholar

[7] M. You, Y. Zheng, X.L. Zheng and W.J. Liu: Int. J. Adhes. Adhes. Vol. 23 (2003), p.365.

Google Scholar

[8] H. Khoramishad and S.M.J. Razavi: Int. J. Adhes. Adhes. Vol. 55 (2014), p.114.

Google Scholar

[9] E. Esmaeili, S.M.J. Razavi, M. Bayat and F. Berto: J. Adhes. (In press) (

Google Scholar

[10] W.J. Renton and J.R. Vinson: J. Adhes. Vol. 7 (1975), p.175.

Google Scholar

[11] M.R. Ayatollahi, M. Samari, S.M.J. Razavi and L.F.M. da Silva: Fatigue Fract. Engng. Mater. Struct. (In press)

DOI: 10.1111/ffe.12575

Google Scholar

[12] S.M.J. Razavi, E. Esmaeili, M. Samari, and S.M.R. Razavi: J. Adhes. (In Press) (

Google Scholar