Axial Behavior of Columns Strengthened with Seismic RC Jacket Section

Abstract:

This study proposes steel bar prefabrication technology including V-type supplementary tie and closed hoops for seismic strengthening of deficient columns. The axial concentric behavior of the columns strengthened with proposed approach in the jacket section was examined using five full-scale specimens. Test results showed that the axial strength of the strengthened columns can be estimated conservatively in accordance with the prediction equations of ACI 318-14 approach. The axial ductility of the strengthened columns was 1.4 times as high as that of the existing column. Overall, the proposed technology is effective in enhancing the axial stiffness, strength, and ductility of the deficient columns.

• Periodical: Key Engineering Materials (Volume 814)
• Pages: 437-442
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.814.437
• Online since: July 2019
• Authors: Yong Ha Hwang, Keun Hyeok Yang*
• Keywords: Axial Performance, Column, Jacket Section, Prefabricated Bar Unit, Strengthening

References

[1] B. Hu, X. Wei, H. Lv, T. Kundu, N. Li, Experimental and Analytical Study on Seismic Behavior of Strengthened Existing Single Frame Structures with Exterior Cantilevers, Adv. Mater. Sci. Eng. 2019 (2019) 1-13.

DOI: 10.1155/2019/3597480

[2] J.K. Wight, Reinforced concrete: mechanics and design (7th ed), Pearson, London, (2016).

[3] D. J. Oehlers, J. P. Moran, Premature Failure of Externally Plated Reinforced Concrete Beams, J. Struct. Eng. 116 (1990) 978-993.

DOI: 10.1061/(asce)0733-9445(1990)116:4(978)

[4] E. N. B. Júlio, F. A. B. Franco, V. D. Silva, Reinforced Concrete Jacketing-Interface Influence on Monotonic Loading Response, ACI Struct. J. 102 (2005) 252–257.

DOI: 10.14359/14276

[5] G. Minafò, F. D. Trapani, G. Amato, Strength and Ductility of RC Jacketed Columns: A Simplified Analytical Method, Eng. Struct. 122 (2016) 184–195.

DOI: 10.1016/j.engstruct.2016.05.013

[6] Y. H. Hwang, K. H. Yang, J. I. Sim, T. S. Choi, Evaluation of Axial Compressive Performance of Section Enlargement Strengthening Columns with Prefabricated Reinforcement Units in the Jacket Section, J. Korea Concr. Ins. 30 (2018) 609–616.

DOI: 10.4334/jkci.2018.30.6.609

[7] K. H. Yang, W. W. Kim, Axial Compression Performance of RC Short Columns with Supplementary V-Shaped Ties, ACI Struct J 113 (2016) 1347–1356.

DOI: 10.14359/51689159

[8] H. J. Kwon, K. H. Yang, J. I. Sim, Proposals of Reliable Shapes of Supplementary V-ties for Section Jacketing Method of Columns, J. Korea Ins. Building Construction 18 (2018) 099–107.

[9] K. I. Lee, H. S. Yoon, K. H. Yang, Compressive and Adhesive Strengths of Mortars using Re-emulsification Type Polymer and Ultra-Rapid-Hardening Cement, J. Korea Ins. Build. Constr. 18 (2018) 329–335.

[10] ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute, USA, (2014).

DOI: 10.1061/(asce)1076-0431(1996)2:3(120.3)