Study on Application of Iron Tailings in Cement Stabilized Macadam

Article Preview

Abstract:

With the rapid development of ferrous metallurgy, the production of iron tailings as waste after beneficiation is increasing. Due to the shortage of natural stone in road construction, iron tailings can be used as an alternative material to natural stone in semi-rigid bases. In order to study the feasibility of application of cement stabilized iron tailings (CSIT) in semi-rigid base, unconfined compressive strength (UCS), indirect tensile strength (ITS) and cyclic freeze-thaw tests were carried out on cement stabilized iron tailings (CSIT). The gradation composition and cement content were selected as influencing factors. The results show that under the condition of the same cement content, the UCS and ITS of CSIT are proportional to the particle size in the mixture. In CSIT with the same gradation, the mechanical properties increase with the increase of cement content; CSM-40(B) has a higher UCS and CSM-40(C) has a higher ITS, the frost resistance coefficient of CSIT increases with the increase of cement content and the tendency of frost resistance coefficient decreases with the increase of cement content. The frost resistanceofCSM-40 (B) is better than that of CSM-40 (C) for the same cement content. Therefore, for the use of iron tailings in CSM, a suitable gradation composition and cement content should be selected.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

231-246

Citation:

Online since:

April 2023

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2023 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] X.P. Ji, N.X. Zheng, Y.Q. Hou, S.S. Niu, Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF), Constr. Build. Mater. 41 (2013) 1-8.

DOI: 10.1016/j.conbuildmat.2012.11.111

Google Scholar

[2] X.P. Ji, N.X. Zheng, S.S. Niu, S.T. Meng, Q.L. Xu, Development of a rutting prediction model for asphalt pavements with the use of an accelerated loading facility, Road Mater. Pavement Des. 17 (1) (2016) 15-31.

DOI: 10.1080/14680629.2015.1055337

Google Scholar

[3] Y.Q. Wang, Y.Q. Tan, M. Guo, X.L. Wang, Influence of emulsified asphalt on the mechanical property and microstructure of cement-stabilized gravel under freezing and thawing cycle conditions, Materials 10 (5) (2017) 504.

DOI: 10.3390/ma10050504

Google Scholar

[4] D.X. Xuan, L.J.M. Houben, A.A.A. Molenaar, Z.H. Shui, Mechanical properties of cement-treated aggregate material A review, Mater. Des. 33 (1) (2012) 496 502.

DOI: 10.1016/j.matdes.2011.04.055

Google Scholar

[5] A. Ismail, M.S. Baghini, M.R. Bin Karim, F. Shokri, R.A. Al-Mansoba, A.A. Firoozi, A.A. Firoozi, Laboratory investigation on the strength characteristics of Cement-Treated Base, in: Sustainable Development of Urban and Rural Areas, Trans Tech Publications Ltd, Stafa-Zurich, 2014, pp.507353-507360.

DOI: 10.4028/www.scientific.net/amm.507.353

Google Scholar

[6] I. Barišic , T. Doksanovic, H. Draganic, Characterization of hydraulically bound base materials through digital image correlation, Constr. Build. Mater. 83 (2015) 299-307

DOI: 10.1016/j.conbuildmat.2015.03.033

Google Scholar

[7] S.W. Du, Influence of chemical additives on mixing procedures and performance properties of asphalt emulsion recycled mixture with reclaimed cement-stabilized macadam, Constr. Build. Mater. 118 (2016) 146-154.

DOI: 10.1016/j.conbuildmat.2016.05.050

Google Scholar

[8] Bektas, F.; Wang, K.; Ceylan, H. Effects of crushed clay brick aggregate on mortar durability. Constr. Build. Mater. 2007, 23, 1909-1914.

DOI: 10.1016/j.conbuildmat.2008.09.006

Google Scholar

[9] Bastos L A C, Silva G C, Mendes J C, et al. Using iron ore tailings from tailing dams as road material[J]. Journal of Materials in Civil Engineering, 2016, 28(10): 04016102.

DOI: 10.1061/(asce)mt.1943-5533.0001613

Google Scholar

[10] X. Ke, X. Zhou, X. Wang, T. Wang, H. Hou, M. Zhou, Effect of tailings fineness on the pore structure development of cemented paste backfill, Constr. Build. Mater. 126 (2016) 345-350.

DOI: 10.1016/j.conbuildmat.2016.09.052

Google Scholar

[11] L. Yang, J. Qiu, H. Jiang, S. Hu, H. Li, S. Li, Use of Cemented Super-Fine Unclassified Tailings Backfill for Control of Subsidence, Minerals. 7 (2017):216

DOI: 10.3390/min7110216

Google Scholar

[12] T.K. Che, B.F. Pan, D. Sha, J.L. Lu, Utilization of iron tailings as fine aggregates in low-grade cement concrete pavement, Mater. Sci. Eng. 479 (2019) 012053.

DOI: 10.1088/1757-899x/479/1/012053

Google Scholar

[13] S.N. Yin, Z.Q. Zhang, L.W. Lin, Research on mechanical property and drying shrinkage property of mortar mixed with iron tailing sand, Bull. Chin. Ceram. Soc. 38 (2019).

Google Scholar

[14] Lv, X.; Shen, W.; Wang, L.; Dong, Y.; Zhang, J.; Xie, Z. A comparative study on the practical utilization of iron tailings as a complete replacement of normal aggregates in dam concrete with different gradation. J. Clean. Prod. 2019, 211, 704-715.

DOI: 10.1016/j.jclepro.2018.11.107

Google Scholar

[15] Mendes B C, Pedroti L G, Fontes M P F, et al. Technical and environmental assessment of the incorporation of iron ore tailings in construction clay bricks [J]. Construction and Building Materials, 2019, 227: 116669

DOI: 10.1016/j.conbuildmat.2019.08.050

Google Scholar

[16] Wang, K.;vLiu, Y.; Lyu, G.; Li, X.; Chen, X. A review of comprehensive utilization of high-iron red mud of China. Light Met. 2020, 65-71.

Google Scholar

[17] Y.H. Cheng, F. Huang, S.S. Qi, W.C. Li, R. Liu, G.L. Li, Durability of concrete incorporated with siliceous iron tailings, Constr. Build. Mater. 242 (2020)118147.

DOI: 10.1016/j.conbuildmat.2020.118147

Google Scholar

[18] Zhao J, Ni K, Su Y, et al. An evaluation of iron ore tailings characteristics and iron ore tailings concrete properties[J]. Construction and Building Materials, 2021, 286: 122968.

DOI: 10.1016/j.conbuildmat.2021.122968

Google Scholar

[19] J.H. Liu, Y.C. Zhou, A.X. Wu, H.J. Wang, Reconstruction of broken Si-O-Si bonds in iron ore tailings (IOTs) in concrete, Int. J. Miner. Metall. Mater. 26 (2019) 1329-1336.

DOI: 10.1007/s12613-019-1811-z

Google Scholar

[20] Peng Huiqing, Li Jun, Luo Mingkun, et al. Research on resource recovery and application of hematite tailings [J]. Modern Mining, 2009 (6): 47-49.

Google Scholar

[21] Li H B. Experimental research on performance of road base with cement stabilized iron tailings sand[C], Applied Mechanics and Materials. Trans Tech Publications Ltd, 2014, 513: 60-64.

DOI: 10.4028/www.scientific.net/amm.513-517.60

Google Scholar

[22] Sun J S, Dou Y M, Chen Z X, et al. Experimental study on the performances of cement stabilized iron ore tailing gravel in highway application[C], Applied Mechanics and Materials. Trans Tech Publications Ltd, 2011, 97: 425-428.

DOI: 10.4028/www.scientific.net/amm.97-98.425

Google Scholar

[23] GBN B.2.3-37641918-554: 2013 Layers of pavement made of stone materials, industrial waste and cement-reinforced soils. Specifications.

Google Scholar

[24] Zhao J, Ni K, Su Y, et al. An evaluation of iron ore tailings characteristics and iron ore tailings concrete properties[J]. Construction and Building Materials, 2021, 286: 122968.

DOI: 10.1016/j.conbuildmat.2021.122968

Google Scholar

[25] DSTU B B.2.7-30-95 Non-metallic materials for gravel and gravel foundations and pavements of roads. Specifications.

Google Scholar

[26] DSTU B B.2.7-46: 2010 Building materials. General construction cements. Specifications.

Google Scholar

[27] Sha Aimin, Hu Liqun. Structural Characteristics of Semi-Rigid Base Material. China Journal of Highway and Transport, 2008, 21(4): 1-5.

Google Scholar

[28] Li D, Jiang YJ, Ren JL (2013) Strength standard of anti-fatigue-fracture cement stabilized macadam based on vibration testing method. J Build Mater 16(2):276-283.

Google Scholar