Technology of Manufacturing Hollow Soil-Cement Blocks

Article Preview

Abstract:

The author analyzed technological solutions for the production of blocks from soil cement. It is proposed to make soil cement blocks from portland cement brand 400 in the amount of 20 % of the mass of soil and water. Experimental addition of fly ash to the solution in different amounts depending on the cement content. It is proposed to add ash removed from the Darnytsya thermal power plant, which was sifted through a 4 mm sieve, because the ash contains a significant amount of impurities. The content of inclusions from 1 to 4 mm was up to 40 %. It is proposed to make blocks from soil cement with the addition of fly ash with the aim of improving the thermotechnical properties. It is proposed to make soil-cement blocks with two voids. To ensure high-quality compaction of products in forms, the moisture content of the content for most soils should be within 14–23 %. The maximum force that the sample can withstand was taken as a destructive load. It was decided that the use of fly ash as part of the mixture in the production of soil cement gives a positive effect. With an increase in the period of exposure of samples in water to 90 days, the average compressive strength of soil cement samples without additives and with the addition of the appropriate percentage of fly ash increases.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

119-127

Citation:

Online since:

August 2024

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2024 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] N.V. Savitsky, M.A. Eliseeva, G.I. Kuzmin, N.V. Novichenko, A.E. Bardakh, E.O. Evseev, Prochnost' gruntobetonov v zavisimosti ot sostava smesi. Sbornik nauchnykh trudov stroitel'stvo, materialovedeniye, mashinostroyeniye [Collection of scientific papers on construction, materials science, and machine construction] 82 (2015).

Google Scholar

[2] Sinha, Pritam and Kannan K. R. Iyer., Effect of Stabilization on Characteristics of Subgrade Soil: A Review (2020).

Google Scholar

[3] Duan, Xue-lei and Jing-shuang Zhang Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber Advances in Materials Science and Engineering (2019).

DOI: 10.1155/2019/9561794

Google Scholar

[4] Yu.A. Kyrychek, G.V. Komissarov Analyz oblasty prymenenyya hruntotsementa v heotekhnyke. Budivelni konstruktsii: zb. nauk. Prats [Building constructions : coll. of scient. works]. Kyiv: DP NDIBK 83 1 (2016) 529–538.

Google Scholar

[5] I.V. Majevska, V.P. Ocheretny, M.S. Honcharuk, Vyznachennya vplyvu dobavok zoly-vynesennya na vlastyvosti gruntotsementu. Innovatsiyni tekhnolohiyi v budivnytstvi. Mizhnarodna n/t konf. VNTU Vinnytsya (2018).

Google Scholar

[6] N.V. Savitsky, N.A. Storozhuk, A.P. Prikhodko, Vremya vernutʹsya k stroytelʹstvu yz samana (Time to return to construction from adobe) Visnyk Prydniprovsʹkoyi derzhavnoyi akademiyi budivnytstva ta arkhitektury (News of the Dnieper State Academy of Civil Engineering and Architecture) Dnipropetrovsk. 10 (2011) 4–7.

Google Scholar

[7] O.G. Vandolovsky, О.А. Hryhorenko, O.B. Dedenova, Simulation of raw clay-calc-slag composites properties of obtained by molding. Systems of information processing: Collected sciences works 3 (140) (2016) 199–202.

Google Scholar

[8] M. Zotsenko, O. Mykhailovska, I. Shirinzade, I. Lartseva, Influence of Fly Ash Additives on Strength Characteristics of Soil – Cement as a Material for Waste Storage Construction Lecture Notes in Civil Engineering Conference Paper. 181 (2022) 457–464.

DOI: 10.1007/978-3-030-85043-2_43

Google Scholar

[9] M.L. Zotsenko, K.A. Timofeeva, Shlamovi ambary dlya vidkhodiv burinnya y ekspluatatsiyi naftohazovykh sverdlovyn z hruntotsementnym protyfilʹtratsiynym ekranom. Visnyk NUVHP. Tekhnichni nauky: zb. nauk. pratsʹ. 2(66) (2014) 337–345.

Google Scholar

[10] DBN B.2.3-4: 2007. Avtomobilʹni dorohy. Chastyna I. Proektuvannya. Chastyna II. Budivnytstvo Kyiv, 2008.

Google Scholar

[11] AKH.Komilov, S.M. Yusupovoy, Fiziko-khimicheskiye osobennosti gidratatsii tsementa v polimertsementnykh suspenziyakh. Materialy Respublikanskoy NPK «Gornyye, geologicheskiye i ekologicheskiye aspekty razvetiya gornorudnoy promyshlennosti v XXI veke», poyev. 100-letiyu akad. Dushanbe (2010) 254–260.

Google Scholar

[12] H. Khelifa, M. Ghrici, H. Missoum, Influence of natural pozzolana and lime additives on the temporal variation of soil compaction and shear strength. Frontiers of Earth Science. 5 (2011) 162–169.

DOI: 10.1007/s11707-011-0166-1

Google Scholar