Crystal Structure and Colorimetric Behavior of Low Melting Point Ternary Alloy

Abstract:

Elements of high purity (99.999) ,were used to prepare the alloy , Bi ,Sn,Zn and Cu .Two types alloy Bi – Sn – Zn and Bi – Sn – Cu were prepared by mechanical alloying technique (MA) .Annealing at 100 °Cfor 8 hours was applied for the resulting alloys . X-ray diffraction and differential scanning colorimetriy were tested for the two types of alloy before and after annealing. The best results was noticed in the ternary alloythat prepared at 4 hours milling time ,and annelid at 100 °C, for 8 hours ,under static air.

• Periodical: Materials Science Forum (Volume 1002)
• Pages: 12-20
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.1002.12
• Online since: July 2020
• Authors: Tarik T. Issa, Sadeer M. Majeed*, Duha S. Ahmed
• Keywords: Bi-Sn-Cu Alloy, Bi-Sn-Zn Alloy, DSC, Mechanical Alloying, Ternary Alloy

References

[1] W.O Soboyejo, T.S, Srivatsan,. Introduction to Advanced Materials. In Advanced Structured Materials;CRCPress:Boca Raton ,FL,USA. (2006).

[2] M.Heilmaier, , M. Krüger, , H. Saage, J. Rösler, , D. Mukherji, G.et al , Metallic for Structure Applications Beyond Nickel –based Super alloys. JOM. (2009), 61: 61-67.

DOI: 10.1007/s11837-009-0106-7

[3] C.Suryanarayana, E.Ivanov, V.V Boldyrev, The science and technology of mechanical alloying, Materials Science and Eng, A304 -306 (2001),151-153.

DOI: 10.1016/s0921-5093(00)01465-9

[4] G.Jangg, E. L. Schults, New Materials by Mechanical Alloying Techniques. DGMI formation esellschaft. (1999), pp: 39-52.

[5] T. T. Issa ,D. K.M., Annealing effect on the lower melting point ternary solder Alloy Sn-Bi-Zn, Research journal of Social Science &Management,.02. 05,Sep.(2012).

[6] El-Eskandarany, M.S. Aoki, K.,Suzuki , Rod Milling For Solid –State Formation of Al30Ta70 Amorphous Alloy powder , J. less Common Metals.(1990) .pp.27-34.

DOI: 10.1016/0022-5088(90)90295-u

[7] M.L. Hvang, L. Joseph , C.G. Wang ,lead free solder alloys Sn-Zn and Sn-Sb ,prepared by mechanical alloying ,Journal of materials science in electronics, Feb.(2000).

[8] C.Suryanarayana, E.Ivanov, Advance Powder Metallurgy, Ch.3, 2013, pp.42-68.

[9] K. Manja, S. Janett , H. Maria ,Similarities and Differences in Mechanical Alloying Processes of V-Si-B and Mo-Si-B Powders, Metals,6( 2016) 241.

DOI: 10.3390/met6100241

[10] Le Brun, P.,Froyen, L., Delaey, L.: The modeling of the mechanically alloying process in a planetary ball mill ,Materials .Science .and Eng., A 161,1993,pp.75-82.

DOI: 10.1016/0921-5093(93)90477-v

[11] C. C Koch, J. D Whittenberger. Mechanical milling/alloying of intermetallics. Intermetallics, 4(1996) 339-355.

DOI: 10.1016/0966-9795(96)00001-5

[12] T. T. Issa S.M. Khalel ,Y.A. Abd Alrazzaq, Mechanical Alloying Effect on Structural Thermal and Mechanical properties of Sn-Bi Alloy ,ACTA PHYSICA POLONICA A ,135 (5) (2019).

DOI: 10.12693/aphyspola.135.1110

[13] C. Suryanarayana, Mechanical alloying and milling CRC Press,28 September, (2004).

[14] T.T. Issa, F.N. Jasim, H.J. Mohameed and Z.K. Abbas, improvement the microstructure of Sn-Bi lead free solder ally .AIP Conference proceedings 1809, 020024, (2017).

DOI: 10.1063/1.4975439