Second Phase Dissolution Influenced by Simultaneously Enhanced Mg, Cu Contents during Homogenization of As-cast Al-Zn-Mg-Cu Alloys

Abstract:

The dissolution of second phase with relatively high melting point in as-cast Al-Zn-Mg-Cu alloys was closely related to Mg and Cu contents. In present work, second phases in three Al-Zn-Mg-Cu alloys with simultaneously enhanced Mg and Cu contents (named by LMC alloy, MMC alloy and HMC alloy as Mg and Cu contents progressively enhanced) were analyzed and the correlated dissolution during homogenization was investigated. The results showed that both Mg(Zn,Cu,Al)₂ phase and Cu-rich phase existed in as-cast alloys while HMC alloy possessed more eutectic phases. As homogenized by 470°C/24h, Mg(Zn,Cu,Al)₂ phase had dissolved completely, LMC alloy contained little Al₂CuMg phase and the amount of it for the three alloys was arranged as LMC alloy < MMC alloy < HMC alloy. As furtherly homogenized by a second stage at 480°C for 12h, no endothermic peak for Al₂CuMg phase was observed for LMC alloy and only Fe-rich phase existed. Meanwhile, Al₂CuMg phase still remained in MMC and HMC alloy. As the homogenization time prolonging to 36h, Al₂CuMg phase in MMC alloy dissolved completely while that still existed in HMC alloy. Adding a third stage at 490°C for HMC alloy, no Al₂CuMg phase could be observed for 24h. This gave rise to a method by incrementally grading homogenization temperature combined with prolonging soaking time to fulfill the dissolution of second phase for Al-Zn-Mg-Cu alloys with enhanced Mg and Cu contents

• Periodical: Materials Science Forum (Volume 1071)
• Pages: 11-19
• DOI: https://doi.org/10.4028/p-310n85
• Online since: October 2022
• Authors: Wei Cai Ren, Kai Wen*, Yong An Zhang, Hong Lei Liu, Tian You Zhang
• Keywords: Al-Zn-Mg-Cu Alloy, Cu Contents, Homogenization, Mg, Second Phase Dissolution

References

[1] P. Jarry, M. Rappaz. Recent advances in the metallurgy of aluminium alloys. Part I: Solidification and casting, CR Phys. 2018, 19(8): 672-687.

DOI: 10.1016/j.crhy.2018.09.003

[2] T. Dursun, C. Soutis. Recent developments in advanced aircraft aluminium alloys, Mater. Des. 2014, 56(4): 862-871.

DOI: 10.1016/j.matdes.2013.12.002

[3] B. Zhou, B. Liu, S. Zhang. The Advancement of 7XXX Series Aluminum Alloys for Aircraft Structures: A Review, Metals, 2021, 11(5): 718.

DOI: 10.3390/met11050718

[4] A. Azarniya, A.K. Taheri, K.K. Taheri. Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective, J. Alloys Compd. 2019, 781: 945-983.

DOI: 10.1016/j.jallcom.2018.11.286

[5] P.A. Rometsch, Y. Zhang, S. Knight. Heat treatment of 7xxx series aluminium alloys—Some recent developments, Trans. Nonferrous Metals Soc. 2014, 24(7): 2003-2017.

DOI: 10.1016/s1003-6326(14)63306-9

[6] H.C. Fang, H. Chao, K.H. Chen. Effect of recrystallization on intergranular fracture and corrosion of Al–Zn–Mg–Cu–Zr alloy, J. Alloys Compd. 2015, 622: 166-173.

DOI: 10.1016/j.jallcom.2014.10.044

[7] A.R. Eivani, H. Ahmed, J. Zhou, et al. An experimental and theoretical investigation of the formation of Zr-containing dispersoids in Al–4.5Zn–1Mg aluminum alloy, Mater. Sci. Eng. A. 2010, 527(9): 2418-2430.

DOI: 10.1016/j.msea.2010.01.012

[8] Z. Shan, S. Liu, L. Ye, et al. Effect of three-stage homogenization on recrystallization and fatigue crack growth of 7020 aluminum alloy, J. Mater. Res. Technol. 2020, 9(6): 13216-13229.

DOI: 10.1016/j.jmrt.2020.09.066

[9] H. Wu, S.P. Wen, H. Huang, et al. Effects of homogenization on precipitation of Al3(Er,Zr) particles and recrystallization behavior in a new type Al-Zn-Mg-Er-Zr alloy, Mater. Sci. Eng. A. 2017, 689: 313-322.

DOI: 10.1016/j.msea.2017.02.071

[10] H. Lin, L. Ye, L. Sun, et al. Effect of three-step homogenization on microstructure and properties of 7N01 aluminum alloys, T. Nonferrous Metals Soc. 2018, 28(5): 829-838.

DOI: 10.1016/s1003-6326(18)64716-8

[11] L. Wu, W. Wang, Y. Hsu, et al. Effects of homogenization treatment on recrystallization behavior and dispersoid distribution in an Al–Zn–Mg–Sc–Zr alloy, J. Alloys Compd. 2008, 456(1-2): 163-169.

DOI: 10.1016/j.jallcom.2007.02.054

[12] H. Wu, S. Wen, J. Lu, et al. Microstructural evolution of new type Al–Zn–Mg–Cu alloy with Er and Zr additions during homogenization, T. Nonferrous Metals Soc. 2017, 27(7): 1476-1482.

DOI: 10.1016/s1003-6326(17)60168-7

[13] E. Acer, E. çadırlı, H. Erol, et al. Effect of heat treatment on the microstructures and mechanical properties of Al-5.5Zn-2.5Mg alloy, Mater. Sci. Eng. A. 2016, 662: 144-156.

DOI: 10.1016/j.msea.2016.03.073

[14] Y. Liu, D. Jiang, W. Xie, et al. Solidification phases and their evolution during homogenization of a DC cast Al–8.35Zn–2.5Mg–2.25Cu alloy, Mater. Charact. 2014, 93: 173-183.

DOI: 10.1016/j.matchar.2014.04.004

[15] J. Liu, Y. Zhang, X. Li, et al. Phases and microstructures of high Zn-containing Al–Zn–Mg–Cu alloys, Rare Metals. 2016, 35(5): 380-384.

DOI: 10.1007/s12598-014-0222-6

[16] D. Xu, Z. Li, G. Wang, et al. Phase transformation and microstructure evolution of an ultra-high strength Al-Zn-Mg-Cu alloy during homogenization, Mater. Charact. 2017, 131: 285-297.

DOI: 10.1016/j.matchar.2017.07.011