Graphene Nano-Lubricant for the Improved Rolling Contact Fatigue (RCF) Life of AISI 4140 Steel under Rolling with Slip Conditions

Abstract:

Rolling and sliding contacts are common tribological interactions between surfaces in high-speed rotating components such as bearings, gears, and rail wheels. If the bearing is operated under mixed/boundary lubrication conditions, the major failure mechanism would be micro-pitting and wear, and its extent depends on the percentage slide between the contact pairs. This work compares the rolling contact fatigue (RCF) behavior of AISI 4140 steel under pure rolling (zero slip) and slip conditions by using base lubricant and formulated lubricant with graphene nanoadditives. Rolling contact fatigue performance under pure rolling and slip conditions shows a significant improvement with graphene lubrication compared to base lubrication. Under pure rolling conditions, the RCF L₁₀ life improved 3-fold with graphene lubricant compared to base lubricant. Similarly, under the slip condition, a significant improvement in the anti-wear performance was observed for the graphene lubrication compared with the base lubrication. A detailed wear track analysis was performed using scanning electron microscopy and Raman spectroscopy. The results reveal that the formation of tribo-films on the surface is the major reason for the improved anti-wear performance with graphene nanolubrication. According to the working conditions, the physical tribo-film was observed under pure rolling conditions, and the chemical tribo-film was observed under slip conditions.

• Periodical: Materials Science Forum (Volume 1147)
• Pages: 71-78
• DOI: https://doi.org/10.4028/p-6Qq4yt
• Online since: March 2025
• Authors: M.R. Ranju*, D. Kesavan
• Keywords: Graphene Nanolubrication, Pure Rolling, Rolling Contact Fatigue, Slip

References

[1] Sadeghi F, Jalalahmadi B, Slack TS, Raje N, Arakere NK. A review of rolling contact fatigue. J Tribol 2009;131:1–15.

DOI: 10.1115/1.3209132

[2] Lorenz SJ, Sadeghi F, Trivedi HK, Kirsch MS, Directorate P, States U, et al. Investigation into rolling contact fatigue performance of aerospace bearing steels. Int J Fatigue 2023;172:107646.

DOI: 10.1016/j.ijfatigue.2023.107646

[3] Olver A V., Guangteng G, Spikes HA. Film thickness and pressure in micro-EHD contacts. vol. 38. Elsevier Masson SAS; 2000.

DOI: 10.1016/s0167-8922(00)80154-6

[4] El Laithy M, Wang L, Harvey TJ, Vierneusel B, Correns M, Blass T. Further understanding of rolling contact fatigue in rolling element bearings - A review. Tribol Int 2019;140:105849.

DOI: 10.1016/j.triboint.2019.105849

[5] Azman NF, Samion S. Dispersion Stability and Lubrication Mechanism of Nanolubricants: A Review. Int J Precis Eng Manuf - Green Technol 2019;6:393–414.

DOI: 10.1007/s40684-019-00080-x

[6] Dai W, Kheireddin B, Gao H, Liang H. Roles of nanoparticles in oil lubrication. Tribol Int 2016; 102:88–98.

DOI: 10.1016/j.triboint.2016.05.020

[7] Shafi WK, Charoo MS. An overall review on the tribological, thermal and rheological properties of nanolubricants. Tribol - Mater Surfaces Interfaces 2021;15:20–54.

DOI: 10.1080/17515831.2020.1785233

[8] Zhao J, Huang Y, He Y, Shi Y. Nanolubricant additives: A review. Friction 2021;9:891–917.

DOI: 10.1007/s40544-020-0450-8

[9] Berman D, Erdemir A, Sumant A V. Graphene: A new emerging lubricant. Mater Today 2014;17:31–42.

DOI: 10.1016/j.mattod.2013.12.003

[10] Paul G, Hirani H, Kuila T, Murmu NC. Nanolubricants dispersed with graphene and its derivatives: An assessment and review of the tribological performance. Nanoscale 2019;11:3458–83.

DOI: 10.1039/c8nr08240e

[11] Paul G, Hirani H, Kuila T, Murmu NC. Nanolubricants dispersed with graphene and its derivatives: An assessment and review of the tribological performance. Nanoscale 2019;11:3458–83.

DOI: 10.1039/c8nr08240e

[12] Alqahtani B, Hoziefa W, Moneam HMA, Hamoud M, Salunkhe S, Elshalakany AB, et al. Tribological Performance and Rheological Properties of Engine Oil with Graphene Nano-Additives. Lubricants 2022;10:1–11.

DOI: 10.3390/lubricants10070137

[13] Azman SSN, Zulkifli NWM, Masjuki H, Gulzar M, Zahid R. Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. J Mater Res 2016;31:1932–8.

DOI: 10.1557/jmr.2016.24

[14] Zhang L, Wei X, Wang J, Wu Y, An D, Xi D. Experimental study on the lubrication and cooling effect of graphene in base oil for Si3N4/Si3N4 sliding Pairs. Micromachines 2020;11.

DOI: 10.3390/mi11020160

[15] Ranju MR, Abhilash PM, Kesavan D. Rolling contact fatigue studies on AISI 4140 steel under formulated lubrication conditions with nanographene additives. Wear 2024;544–545:205311.

DOI: 10.1016/j.wear.2024.205311

[16] Ranju MR, Kesavan D. Effect of Shot Peening Process on Rolling Contact Fatigue Performance of EN 31 Alloy Steel. Tribol - Finnish J Tribol 2023;40:29–36.

DOI: 10.30678/fjt.125884

[17] Hamrock BJ, Dowson D. Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III-Fully Flooded Result. J Tribol 1977;99:264–75.

DOI: 10.1115/1.3453074