The Numerical Simulation of Conductive Body Forming Process and Mould Design

Abstract:

T2-copper conductive body is a important part used in high voltage switch, it has poor machining process due to the complex shape. Through Deform numerical simulation, conductive body was formed by open-die forging and closed die forging. In the open-die forging simulation，heat transfer coefficient between blank (880°C) and open-die (200°C) is 11, the surrounding environment temperature is 20°C, friction factor is 0.3. The main open-die forging process parameters is: outer draft angle α=6.5°; inner draft angle β＝10°; bridge width b＝5、8、11mm. punching skin and cylindrical blank. Simulation results show that forging can meet the requirement while properly adjusting mould parameters. The main size of closed-die forging working parts is designed according to the conductive body graph, no draft angle and ring blank of external diameter Φ111mm and inside diameter Φ93mm with the same volume of conductive body. The simulation results shows that forging can be formed using open-die forging, and it is difficult to form product by the process of the closed-die forging for ring blank because of the restriction of solid state metal liquidity, many regions of the filling is not sufficient. Open-die forging and casting blank-closed die forging are both used in actual production. The casting blank-closed die forging is a more reasonable forming process compared with the open-die forging as metal volume of distribution is solved, higher utilization rate of material, more simple process in following work and the like. To make it more suitable for practical production, appropriate adjustments of some parameters was made in the mold design process based on the numerical simulation. Keywords: open-die forging; casting blank–closed die forging; numerical simulation

• Periodical: Materials Science Forum (Volumes 704-705)
• Pages: 177-182
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.704-705.177
• Online since: December 2011
• Authors: Jian Xin Gao, Pei Feng Zhao, Ke Xing Song, Qing Wang
• Keywords: Casting Blank–Closed Die Forging, Numerical Simulation, Open-Die Forging

References

[1] Liu gengwu. research on copper alloy die forging technology [J]. Tooling Technology, China, 2007，(3).

[2] Song kexing, Gao jianxin. The Process of Casting Blank-Prec is ion Forging Used in Synchromesh Gear of Heavy-duty Truck [J]. Hot Working Technology, China, 2000, (5).

[3] Zhang zhengxiu, Ma xinmei, Li yiping. casting blank die forging technology [J]. Tooling Technology, China, 1999, (2).

[4] Zhang zhiwen. Forging Technology [M]. Beijing : China Machine Press, 1983, 5.