Study on the Microstructures and Wear Resistance of ZG30Cr Steel Surface Layer

Shu Li Wang; Ai Qin Wang; Jing Pei Xie

doi:10.4028/www.scientific.net/MSF.704-705.23

Paper Titles

Features of Deformation of Partly Crystallization Blooms at their Two-Stage Soft Reduction
p.1

Al₂O₃-TiC/Fe Functionally Gradient Material Prepared by SHS Casting
p.6

Derivation and Application for Calculation of Carbon Content in Austenitizing of Cast Iron
p.11

Field Synergy Analysis for Inclusion Removal in the Continuous Casting Tundish
p.16

Study on the Microstructures and Wear Resistance of ZG30Cr Steel Surface Layer
p.23

Numerical Simulation Analysis on Shrinkage and Porosity of ZL101A Alloy Mechanism Box
p.28

The St Venant Zone Extent of the Self-Balancing Longitudinal Elastic Stress
p.33

Casting Process Optimization for Large Bearing Bush of Zinc-Base Alloy
p.40

Study on Formability of Tailor Welded Blanks Based on Numerical Simulation
p.45

HomeMaterials Science ForumMaterials Science Forum Vols. 704-705Study on the Microstructures and Wear Resistance...

Study on the Microstructures and Wear Resistance of ZG30Cr Steel Surface Layer

Abstract:

In this paper ,the WC and high-Cr Cast Iron layer were obtained on the surface of ZG30Cr steel by casting-penetrating process, the organization and wear properties of penetrating layer were studied.The results show that the layer is dense, without pores, slag and other defects, the penetrating layer and substrate are metallurgical bonding. When 30 %WC and 70 % Cr-Fe with 100～120 mesh are added to permeability agent ,the penetrating layer has the best wear resistance, is 6.8 times the matrix materials. Keywords: The layer structure; Particle size; Wear resistance