Microstructure and Mechanical Properties of FSWed Aluminum Extrusion with Bobbin Tools

Abstract:

Bobbin FSW technique is assessed in terms of process productivity and robustness considering the metallurgical and mechanical qualities of the joint. Several different designed bobbin tools were applied to aluminium A6xxx alloy extrusions, at feed rate of 400-1000mm/min with tool rotation speed of 600-1000rpm. In case of A6068-T6, a joint efficiency of 68% was achieved at 600mm/min, which is almost equivalent to the productivity and quality of the conventional FSWed joints, hence the potential of bobbin FSW technique was suggested. The bobbin tool design was further optimized considering the practical process robustness to the part fit issue, and defect free welds have been achieved for the joints with a set gap up to 1mm. However, the oxide remnant, so called “lazy S” was observed in a joint made with an inadequate designed tool, which significantly deteriorates the mechanical properties.

• Periodical: Materials Science Forum (Volumes 706-709)
• Pages: 990-995
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.706-709.990
• Online since: January 2012
• Authors: K. Okamoto, A. Sato, Seung Hwan C. Park, Satoshi Hirano
• Keywords: Aluminum (Al), Bobbin Tool, Friction Stir Welding (FSW), Microstructure

References

[1] W.M. Thomas et al.: Friction Stir Welding, Int'l Patent Application PCT/GB92/02203 (1991).

[2] Y. Yokosuka et al.: Development and Global Deployment of Environmentally Conscious Railway Systems, Hitachi Review Vol. 59 (2010), p.165.

[3] C.L. Campbell, et al.: Welding Head, U.S. Patent 6, 199, 745 (2001).

[4] H. Badarinarayan, et al.: Effect of Tool Thermal Expansion and Durability in Friction Stir Spot Welding, 2007 SAE World Congress, Paper No. 2007-01-1026, Michigan, USA, (2007).

DOI: 10.4271/2007-01-1699