Casting of Clad Strip of Al-SiCp, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster

Toshio Haga; Kentaro Okamura; Hisaki Watari; Shinichi Nishida

doi:10.4028/www.scientific.net/MSF.893.262

Paper Titles

Distribution of Aspect Ratio of Fatigue Crack at Notch Root Depending on Crack Initiation Point of Annealed Steel, JIS S45C
p.240

Microstructural Evolution and Mechanical Properties of Low C-Mn Steels Subjected to Accelerated Cooling
p.245

Fractal Geometry in Metallurgy of Welding and Coatings
p.252

Experimental Research of Effects of Electric Parameters on the Machining Speed and Surface Quality in EDM
p.257

Casting of Clad Strip of Al-SiC_p, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster
p.262

Numerical Simulation and Experimental Research on Forging of Cylinder Bottom
p.267

Mathematical Simulation of Flux Film State in Gap between Mould and Solidified Shell
p.272

Numerical Simulations of Low Pressure Die-Casting for A356 Aluminum Rims
p.276

Researches on the Temperature Field during the Process of Reparation by Laser Cladding through Simulation and Experiments
p.281

HomeMaterials Science ForumMaterials Science Forum Vol. 893Casting of Clad Strip of Al-SiCp, Magnesium Alloy...

Casting of Clad Strip of Al-SiC_p, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster

Abstract:

Casting of clad strip consisting of Al-30vol%SiC_p and 1070 aluminum alloy, and clad strip consisting of AM60 magnesium alloy and AZ121 magnesium alloy was carried out in an oxidizing atmosphere by two types of twin roll casters. One was the vertical type twin roll caster equipped with a scraper and the other was the melt drag type vertical type twin roll caster, both operating at a speed of 30 m/min and a roll load of 0.2 kN/mm. The clad strip of the aluminum alloys could be cast by both twin roll casters. The clad strip of the magnesium alloys could be cast only by the vertical caster equipped with a scraper. The clad strips were bonded strongly at the interface in spite of the high roll speed and the low roll load.

You might also be interested in these eBooks

Mechanical Engineering, Materials Science and Civil Engineering IV

View Preview

Info:

Periodical:

Materials Science Forum (Volume 893)

Pages:

262-266

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.893.262

Citation:

Cite this paper

Online since:

March 2017

Authors:

Toshio Haga*, Kentaro Okamura, Hisaki Watari, Shinichi Nishida

Keywords:

Al-Sic_p, Clad Strip, Magnesium Alloy, Scraper, Twin Roll Caster

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] T. Haga, K. Akitsu, S. Kumai, H. Watari, A single roll caster for aluminum alloy strip, Advanced Materials Research. 382(2012) 368-371.

DOI: 10.4028/www.scientific.net/amr.382.368

Google Scholar

[2] T. Haga, K. Akitsu, S. Kumai, H. Watari, Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper, Advanced Materials Research. 445(2012) 307-312.

DOI: 10.4028/www.scientific.net/amr.445.307

Google Scholar

[3] T. Haga, K. Akitsu, K. Kamakura,S. Kumai, H. Watari, Single roll caster equipped with a scraper, Key Engineering Materials. 504-506(2012) 1243-1248.

DOI: 10.4028/www.scientific.net/kem.504-506.1243

Google Scholar

[4] T. Haga, H. Tsuge, T. Ishihara, S. Kumai, H. Watari, A vertical type tandem twin roll caster for clad strip equipped with a scraper, Key Engineering Materials. 611-612(2014) 623-628.

DOI: 10.4028/www.scientific.net/kem.611-612.623

Google Scholar

[5] T. Haga, Casting of Clad Strip by a Twin Roll Caster Materials, Science Forum. 794-796 (2014) 772-777.

DOI: 10.4028/www.scientific.net/msf.794-796.772

Google Scholar

[6] T. Haga, M. Motomura, A. Munaf, S. Suzuki, J. Japan Inst. Light Metals. 44(1994) 136-141.

Google Scholar

[7] T. haga,K. Ishiahara, T. Katayama, T. Nishiyama, J. Japan Inst. Light Metals. 48(1998) 613-617.

Google Scholar