The Relationship of the Asphalt Mixtures Composition and Physical Mechanical Characteristics of the Coating

Abstract:

In the course of the work performance the following surveys were carried out: the analysis of the information assurance of the asphalt concrete mixtures production quality, the study of the relationship between the composition of asphalt concrete mixtures and the physical and mechanical characteristics of the coating. This paper presents the results of the analysis of the two types asphalt concrete mixtures qualitative composition and its effect on the physical, mechanical and technological characteristics of the coating. It is established that the deviation of asphalt concrete mixtures in composition from the required values ​​leads to their under-compaction in the coating. It was also found that the increase in the number of inconsistencies in the composition of the asphalt concrete mixture leads to the increase in physical and mechanical characteristics that differ from the requirements of GOST 9128-2013 and GOST 31015-2002. The amount of bitumen on the asphalt concrete main characteristics, the data from the existing AP in the Belgorod Region were used as the information base in assessing the influence of granulometry of the asphalt concrete mineral part. Analysis of the particle size distribution was carried out using the laser analyzer for asphalt concrete AP 7 / 35B. The obtained data will be the basis for further study of the various parameters influence on the asphalt mixes properties, as well as improving the efficiency of the asphalt mix production control system.

• Periodical: Materials Science Forum (Volume 974)
• Pages: 31-36
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.974.31
• Online since: December 2019
• Authors: A.I. Trautvain*, Evgeniy A. Yakovlev, V.A. Grichanikov, Ye.D. Potar'
• Keywords: Asphalt Concrete Mixtures, Mechanical Characteristics of the Coating, Physical Characteristics of the Coating, Production, Qualitative Composition, Technological Characteristics of the Coating

References

[1] A.Yu. Kudryavtsev, Quality control of production of asphalt concrete plant, Journal of Information systems and technologies. 67 (5) (2011) 67-73. (In Russian).

[2] I.B. Bagaudinov et al., Intensification of the production of asphalt mixes, Mechanics of the XXI century. 11 (2012) 353-358. (In Russian).

[3] A.V. Ostroukh, et al., Automation of technological process control of an asphalt concrete plant, In the World of Scientific Discoveries, V Mire Nauchnykh Otkrytiy 66 (6) (2015).

DOI: 10.12731/wsd-2015-6-7

[4] H. Da-yong, Y. Ju-qing, Design of distributed computer control system based on the fieldbus for asphalt concrete mixer, In 2010 International Conference on Computer Application and System Modeling (ICCASM 2010). 15 (2010, October) 515-587.

DOI: 10.1109/iccasm.2010.5622496

[5] Qinwu Xu, K. Chang George, Adaptive quality control and acceptance of pavement material density for intelligent road construction, Automation in Construction. 62 (2016) 78-88.

DOI: 10.1016/j.autcon.2015.11.004

[6] F. Peyret, R. Tasky, A traceability system between plant and work site for asphalt pavements, Computer‐Aided Civil and Infrastructure Engineering. 19 (1) (2004) 54-63.

DOI: 10.1111/j.1467-8667.2004.00337.x

[7] Sicong Zhu, et al., Development of an Automated Remote Asphalt Paving Quality Control System, Journal of Transportation Research Record. 2672 (26) (2018) 28-39.

DOI: 10.1177/0361198118758690

[8] Yiqiu Tan, et al., Analysis of Asphalt Pavement Structural Premature Damage Position and Countermeasure, Highway and Transportation Research and Development. 5 (2012) 002.

[9] S.V. Aleksikov Laying hot asphalt mixes in repairing urban road pavements, Volgograd State University of Architecture and Civil Engineering Bulletin. 17 (2010) 35-42. (In Russian).

[10] S.V. Aleksikov, Study of the causes of premature destruction of asphalt concrete pavements of urban roads, Roads and bridges. 1 (29) (2013) 113-124.

[11] Alireza Mohammadinia, et al., Effect of fly ash on properties of crushed brick and reclaimed asphalt in pavement base/subbase applications, Hazardous materials. 321 (2017) 547-556.

DOI: 10.1016/j.jhazmat.2016.09.039

[12] D.S. Black, D.A. Stroyev, S.A. Batirov, Harmonization of the requirements of European standards for the particle size distribution of SMA-11 (SCHMA-11) taking into account the requirements of Russian standards, Engineering Bulletin of the Don. 42 (3) (2016) 112-120. (In Russian).

[13] A. Trautvain, V. Yadykina, M. Lebedev, A. Akimov, Preliminary studies of conversion chalk as a mineral powder for asphalt mixes, Journal of Vestnik BSTU. V.G. Shukhov. 6 (2018) 21-27. (In Russian).

[14] A.I. Trautvain, A.E. Akimov, V.P. Denisov, M.V. Lashin, Features of the method of bulk design of asphalt concrete technology Superpave, Bulletin of BSTU named after V.G. Shukhov. 2 (2019) 56-61. (In Russian).

DOI: 10.34031/article_5ca1f62f6b9a09.67742444

[15] A.N. Kuzmin, P.E. Manokhin, The use of innovative methods for the production of asphalt mix without increasing the estimated cost of the project, Volga Scientific Herald. 12 (1) (64) (2016). (In Russian).

[16] А. А. Khudokonenko, S. A. Chernov, Porous mastic asphalt mixes and experience in their use, Vestnik MGSU. 12 (11) (110) (2017). (In Russian).

DOI: 10.22227/1997-0935.2017.11.1284-1288

[17] N. D. Seliverstov, Selection of asphalt–concrete mixed compositions in cold recycling of road surfaces, Polymer Science Series D. 9 (1) (2016) 106-109.

DOI: 10.1134/s1995421216010184

[18] V. Yadykina, A. Gridchin, A. Trautvain, V. Kholopov, The Effectiveness of Using RAA-TA Additives for the Preparation of Warm Asphalt Concrete, Applied Mechanics and Materials. 865 (2017) 259-262. (In Russian).

DOI: 10.4028/www.scientific.net/amm.865.259

[19] M.A. Zavyalov, A.M. Kirillov, Evaluation methods of asphalt pavement service life, Magazine of Civil Engineering. 2 (2017) 42–56.

[20] V. Yadykina, A. Trautvain, A. Akimov, E. Yakovlev, The Influence of «DORLUK» Impregnation on Physical and Mechanical Characteristics of Asphalt Pavements, Advanced Materials Reserch. 1147 (2018) 48-52. (In Russian).

DOI: 10.4028/www.scientific.net/amr.1147.48

[21] B.B. Teltayev, C.O. Rossi, S. Ashimova, Composition and rheological characteristics of bitumen in short-term and long-term aging, Magazine of Civil Engineering. 81 (2018) 93–101.

[22] State general education standard 9128–2013. Asphalt road, airfield and asphalt concrete mixtures, Technical conditions, Enter 01.01.2013, Gosstandart of Russia, Moscow, (2013).

[23] State general education standard 31015-2002, Mix asphalt and asphalt concrete mastic, Technical conditions, Enter 01.05.2003, State standard of Russia, Moscow, (2003).