Modeling of Macro-Physical Parameters of Foam Glass under Exposure of Cyclic Thermal Effects

Abstract:

The process of the raw materials mixture heat treatment in the foam glass production is of great importance in the formation of the finished product thermal characteristics. Selection of optimal temperature regimes at the stages when the process of glass particles melting is activated and thermal decomposition of the gasifier occurs is of particular importance. Otherwise, a situation when the gasifier has decomposed by mass on the layers close to the material surface at that the reaction has not been initiated at the raw materials mixture center may emerge. The problem can be solved by the uniform heating throughout the raw materials mixture entire volume. The fact that excessive heating can entail additional financial costs for manufacturers’ energy resources and as a result the cost of the material can be increased and affect its competitiveness among thermal insulation materials should be taken into account. A method for calculating temperature fields allowing to simulate the thermophysical heating process in the center of the material under study on the basis of its surface temperature indicators has been presented in the paper. Such an approach may make calculation of the rational time intervals for the raw material mixture heat treatment prior to the foaming stages and partially optimization of the production process possible.

• Periodical: Materials Science Forum (Volume 974)
• Pages: 464-470
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.974.464
• Online since: December 2019
• Authors: Sergey Viktorovich Fedosov*, M.O. Bakanov, S.N. Nikishov
• Keywords: Foam Glass, Heat Transfer, Heat Treatment, Raw Material Mixture, Temperature Fields

References

[1] S.V. Fedosov, M.O. Bakanov, S.N. Nikishov, Study and simulation of heat transfer processes during foam glass high temperature processing, International Journal for Computational Civil and Structural Engineering. 14(3) (2018) 153-160.

DOI: 10.22337/2587-9618-2018-14-3-153-160

[2] S.V. Fedosov, M.O. Bakanov, S.N. Nikishov, Kinetics of structural transformations at pores formation during high-temperature treatment of foam glass, International Journal for Computational Civil and Structural Engineering. 14(2) (2018) 158-168.

DOI: 10.22337/2587-9618-2018-14-2-158-168

[3] S.V. Fedosov, M.O. Bakanov, S.N. Nikishov, Kinetics of Cellular Structure Formation at Thermal Treatment Processes Simulation in the Cellular Glass Technology, Materials Science Forum Submitted. 931 (2018) 628-633.

DOI: 10.4028/www.scientific.net/msf.931.628

[4] N.S. Semeynykh, G.V. Sopegin, Analysis of the use of various raw materials in the production of granulated foam glass, Bulletin of the Perm National Research Polytechnic University. Construction and architecture. 8(1) (2017) 60–74. (In Russian).

DOI: 10.15593/2224-9826/2017.1.05

[5] R.V. Gorodov, A.V. Kuzmin, Mathematical models of heating the mixture in the process of production of foam glass, High-tech, basic research, education: reports of the VII International Scientific.-Pract, conf. S.-Pb. (2009) 321–322. (In Russian).

[6] A.M. Demin, Mathematical modeling of raw material preheating in the process of foam glass production, Bulletin of civil engineers. 1(36) (2013) 166–172. (In Russian).

[7] S.V. Fedosov, M.O. Bakanov, A.V. Volkov et al., Mathematical Model of the Pore Formation Dynamics Owing to Heat Treatment of the Foam Glass Batch, Journal of Higher Educational Establishments. Chemistry and Chemical Technology. 57(3) (2014) 73-79. (In Russian).

[8] A.V. Lykov, Yu.A. Mikhailov, Theory of heat and mass transfer, Gosenergoizdat, Moscow, 1963. (In Russian).

[9] S.V. Fedosov, Heat and mass transfer in the technological processes of the construction industry, PressSto, Ivanovo, 2010. (In Russian).

[10] V.A. Ditkin, A. P. Prudnikov, Operational calculus, Higher School, Moscow, 1975. (In Russian).