Research on the Use of Synthetic Slags to Steel Elaborated in Duplex System EBT-LF

Adriana Putan; T. Hepuţ; Vasile Putan; Lucia Vilceanu

doi:10.4028/www.scientific.net/SSP.188.293

Paper Titles

Stress Evaluation by Neutron and Synchrotron Radiation
p.262

Morphology and Dielectric Properties of some LDPE/PA Blends in Presence of Compatibilizers
p.268

Turning of Advanced Alloys with Vibrating Cutting Tool
p.277

Study on Continuous Casting of Steel by Sizes
p.285

Research on the Use of Synthetic Slags to Steel Elaborated in Duplex System EBT-LF
p.293

Research on Welded Thin NiTi Wires and Orthodontic Bands
p.300

The Influence of the Mechanical Vibrations upon 1.7035 – 41Cr4 Steel during Hardening Process
p.306

Controlled Temperature Distribution and Heat Transfer Process in the Unidirectional Solidification of Aluminium Alloys
p.314

Structure Characteristics of Ce-Inoculated, Low Sulphur Grey Cast Irons
p.318

HomeSolid State PhenomenaSolid State Phenomena Vol. 188Research on the Use of Synthetic Slags to Steel...

Research on the Use of Synthetic Slags to Steel Elaborated in Duplex System EBT-LF

Abstract:

Within the researches made, the establishment of the processing with synthetic slag decreasing possibilities, of the sulphur and oxygen contents, from the steel made in electric arc ovens, of 100 ton ladle capacity oven (LF) - (EBT) type, was taken into account. For the formation of the synthetic slag, reducing mixing made of lime, fluorine, bauxite and aluminum slag from the aluminum electrolysis were used. On average 1950 kg reducing mix/charge added on three stages were used. The processing period in LF was 40-60 min., and the pressure of Argon used at splashing was in the range of 3.5 - 5.5 at. Within the experiments, for the desulphurisation degree, respectively deoxidation, medium values of: ηSmed = 38,75 (35- 44), ηOmed = 54,821 (47 - 61) were obtained. On the Matlab program data processing, correlation equations between: ηO and ηS and the chemical composition of reducing slag and the parameters of splashing with Argon were obtained.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 188)

Pages:

293-299

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.188.293

Citation:

Cite this paper

Online since:

May 2012

Authors:

Adriana Putan, T. Hepuţ, Vasile Putan, Lucia Vilceanu

Keywords:

Desulphurisation Process, Refining, Steel, Synthetic Slag, Treatment Ladle

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] K.W.Yi, K.Tse and others, Determination of dissolution time of alumina and magnezia inclusions in synthetic CaO-Al2O3-SiO2 slag, Scandinavian Journal of Metallurgy, vol.32, Issue 4, (2003) 177-184.

Google Scholar

[2] Valdez M., Kramb A.W., Sridhaer S., A study of the disolution of Al2O3, MgO and MgAl2O4 particles in a CaO-Al2O3-SiO2 slag, Iron Making and Stell Making, no.29, (2002) 47-52.

Google Scholar

[3] Vacu S.ş.a., Elaboration of alloy steel , vol.I, TehnicaL Publishing House, Bucharest, 1983.

Google Scholar

[4] Tripşa I., Pumnea C., Steel deoxidation, TehnicaL Publishing House, Bucharest, 1981.

Google Scholar

[5] Hepuţ T., Ardelean E., Socalici A., Maksay S., Gavănescu A., Steel desulphurization with syntetic slag, Revista de Metalurgia, Madrid, 43, (2007) 42-49.

DOI: 10.3989/revmetalm.2007.v43.i1.50

Google Scholar