Calibration of Cameras and Fringe Pattern Projectors in the Vision System for Positioning of Workpieces on the CNC Machines

Stefan Domek; Paweł Dworak; Marek Grudziński; Krzysztof Okarma

doi:10.4028/www.scientific.net/SSP.199.229

Paper Titles

Tribological Behavior of Aerosol Particles in Acoustic Field
p.205

Tribological Characteristics of Anodic Oxide Coat (AOC) Modified - Sealed up the Polymer
p.209

A New Model of the Neuron for Biological Spiking Neural Network Suitable for Parallel Data Processing Realized in Hardware
p.217

Analysis of Significant Prognostic Factors of Patients with Bladder Cancer Using Self-Organizing Maps
p.223

Calibration of Cameras and Fringe Pattern Projectors in the Vision System for Positioning of Workpieces on the CNC Machines
p.229

Filtering Algorithms for 3D Range Image Analysis
p.235

Finding Bearing in Robot Navigation with the Use of the Kalman Filter
p.241

Low Power, Low Chip Area, Digital Distance Calculation Circuit for Self-Organizing Neural Networks Realized in the CMOS Technology
p.247

Visualization of the Workpieces on the CNC Machines Using the Virtual Camera Based on the Sub-Pixel IBR Method
p.253

HomeSolid State PhenomenaSolid State Phenomena Vol. 199Calibration of Cameras and Fringe Pattern...

Calibration of Cameras and Fringe Pattern Projectors in the Vision System for Positioning of Workpieces on the CNC Machines

Abstract:

Application of machine vision in automation, robotics and mechatronic systems is one of the most rapidly developing areas of industrial and applied computer science. The vision system presented in the paper can be used for automatic positioning of the workpieces on the numerically controlled machines. The idea of the system is based on the 3D scanning using the fringe patterns approach [ but its accuracy strongly depends on the lighting conditions and the proper calibration of the whole vision system. The most crucial elements for the calibration are both cameras and structural light projectors, as well as the overall geometrical configuration (external parameters in the common coordinate system) and the compensation of the brightness nonlinearities introduced by the structural light sources. In the paper some methods used for the calibration of the experimental system and obtained results are presented.