Semi-Solid Die Casting of Al-25%Si

Toshio Haga; Hiroshi Fuse

doi:10.4028/www.scientific.net/SSP.217-218.312

Paper Titles

Investigation of Parameters Promoting Hot Cracking during Semi-Solid Forming Processes
p.281

Production of Aluminum/SiC/NiAl₂O₄ MMCs by Thixoforming of Recycled Chips
p.286

THINCAST^TM; Providing Strong, Lightweight Castings for Automobiles and Other Applications
p.294

A Study on Bubbles in Semisolid Alloys
p.302

Semi-Solid Die Casting of Al-25%Si
p.312

Influence of Process Parameters on Surface Appearance and Roughness of a Low Si Containing Al-Alloy, in Semisolid Casting
p.318

Steels with High Temperature Carbides - New Possibilities for Semi-Solid State Processing
p.325

Comparison of Microstructure and Mechanical Properties of Semi-Solid Castings Produced Using Billets Made by EMS and SEED
p.332

The Refinement Mechanism of La-Ce Binary Alloy on Primary α Phase in A356 Alloy under Electromagnetic Stirring
p.340

HomeSolid State PhenomenaSolid State Phenomena Vols. 217-218Semi-Solid Die Casting of Al-25%Si

Semi-Solid Die Casting of Al-25%Si

Abstract:

It became clear that semisolid Al-25%Si has excellent flow ability and suitable for thin product die casting thinner than 1mm. Semisolid die casting of thin fin was tried using Al-25%Si. The rheocasting was selected. The pouring temperature of melt was 1103K, and the casting temperature was as same as the liquidus line 1033K. The fine, which thickness was 0.5mm, height was 25mm and draft angle was 0.5 degree, could be cast at the plunger speed of 0.8 m/s. The primary Si was smaller than 0.2mm. The α-aluminum existed by the super cooling.

You might also be interested in these eBooks

Semi-Solid Processing of Alloys and Composites XIII

View Preview

Info:

Periodical:

Solid State Phenomena (Volumes 217-218)

Pages:

312-317

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.217-218.312

Citation:

Cite this paper

Online since:

September 2014

Authors:

Toshio Haga*, Hiroshi Fuse

Keywords:

Al-25%Si, Fin, Rheocasting, Semi-Solid Die Casting, Thin Plate

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] P. Eisen, K. Young, Diecasting system for semi-liquidus and semisolid metal casting, Proceedings of the Sixth International Conference on Semisolid Processing of Alloys and Composites, (2000) 41-46.

Google Scholar

[2] T. Haga, P. Kapranos, Simple rheocasting processs, J. Mater. Process. Technol. (2002), 594-598.

Google Scholar

[3] T. Haga, P. Kapranos, Billetless simple thixoforming process, J. Mater. Process. Technol. (2002), 581-586.

DOI: 10.1016/s0924-0136(02)00817-8

Google Scholar

[4] A. Kraly, Development and industrial production of thixalloy as a system solution, Proceedings of the Sixth International Conference on Semisolid Processing of Alloys and Composites, (2000) 495-500.

Google Scholar