Effects of Cu on the Microstructures and Tensile Properties of Thixoformed Al-Si Alloys

Abstract:

In this study, the effects of copper content on the microstructures and tensile properties of thixoformed Al-5Si-xCu-0.5Fe (x =1.0, 2.0 and 3.0 wt. %) were investigated. For this study, three different alloys having various amounts of copper were prepared using cooling slope casting before thixoforming. The semi-solid liquid range for the alloys were estimated using the diffrential scanning calorimetry (DSC) analysis. The samples were thixoformed at 40% liquid fraction. Some of these samples were treated with a T6 aging process. The thixoformed and thixoformed T6 samples were then characterized by optical microscopy, scanning electron microscope (SEM) and energy dispersive X-ray (EDX) as well as tensile tests. The different phases formed in the thixoformed and thixoformed T6 samples were throughly investigated.The results indicate that as copper content increases, the tensile strength also increases, which might due to precipitation hardening. The thixoformed T6 alloys attained an ultimate tensile strength (UTS) as high as 303 MPa when Cu content is 3 wt%.

• Periodical: Solid State Phenomena (Volumes 217-218)
• Pages: 91-98
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.217-218.91
• Online since: September 2014
• Authors: Mohd Shukor Salleh*, Mohd Zaidi Omar, Junaidi Syarif, K.S. Alhawari, M.N. Mohammed
• Keywords: Al-5Si-xCu-0.5Fe Alloys, Cooling Slope, Thixoforming, T6 Heat Treatment, Tensile Properties

References

[1] M.S. Salleh, M.Z. Omar, J. Syarif and M.N. Mohammed, An overview of semisolid processing of aluminium alloys, ISRN Materials Science. Vol. 2013 (2013), pp.1-9.

DOI: 10.1155/2013/679820

[2] M.Z. Omar, H. V, Atkinson, P. Kapranos. Thixotropy in semisolid steel slurries under rapid compression. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Vol. 42 (2011) pp.2807-19.

DOI: 10.1007/s11661-011-0671-6

[3] M.N. Mohammed, M.Z. Omar, M.S. Salleh, K.S. Alhawari, P. Kapranos. Semisolid metal processing techiques for nondendritic feedstock production. The Scientific World Journal. Vol. 2013 (2013).

DOI: 10.1155/2013/752175

[4] B.C. Liao, Y.K. Park, H.S. Ding, Effects of rheocasting and heat treatmet on microstructure and mechanical properties of A356 alloy, Materials Science and Engineering A. Vol. 528 (2011), pp.986-995.

DOI: 10.1016/j.msea.2010.09.059

[5] E.J. Zoqui and M.A. Naldi, Evaluation of the thixoformability of the A332 alloy, Journal of Materials Science. Vol. 20 (2010), pp.7558-7566.

DOI: 10.1007/s10853-011-5730-2

[6] M.S. Salleh, M.Z. Omar, J. Syarif, M.N. Mohammed, Thermodynamic modelling for thixoformability of Al-Si alloys for semisolid processing, Advanced Science Letters. Vol. 19 (2013), pp.3503-3507.

DOI: 10.1166/asl.2013.5205

[7] M.S. Salleh, M.Z. Omar, J. Syarif, M.N. Mohammed, Thermodynamic simulation on thixoformability of aluminium alloys for semi-solid processing, International Journal of Mathematics and Computers in Simulation. Vol. 7(2013), pp.286-293.

[8] Z. Fan, Semisolid metal processing, International Materials Reviews. 47 (2002), pp.49-85.

[9] M.A.M. Arif, M.Z. Omar, N. Muhamad, J. Syarif, P. Kapranos, Microstructural evolution of solid-solution-treated Zn-2Al in the semisolid state, Journal of Materials Science & Technology. Vol. 29 (2013), pp.765-774.

DOI: 10.1016/j.jmst.2013.04.003