Experimental Validation of the Numerical Model of a Testing Platform Impact on a Road Mast

Artur Cichański; Michał Stopel

doi:10.4028/www.scientific.net/SSP.224.222

Paper Titles

Shear Strength Testing of Bonded Joints of Dental Materials
p.198

The Influence of Mesh Morphology on the Accuracy of FEM Analysis of Bar with a Ringed Notch under Tension
p.204

Performance of Bone Modelling Techniques in the Assessment of Bone Fragility
p.210

Investigation of Material Properties of Layered Al-Ti Material with the Use of Microspecimens
p.216

Experimental Validation of the Numerical Model of a Testing Platform Impact on a Road Mast
p.222

The Development of an Experimental Research Plan Based on Local Strain-Life Method for an Air Handling Unit Subjected to Seismic Loads
p.226

Influence of Adhesive Layer on Mechanical Properties of Multilayer Pipes
p.232

Temperature Changes Induced by the Portevin-Le Châtelier (PLC) Effect during Tensile Test Based on the Example of CuZn37 Brass
p.238

Modelling of Charpy Test Using the FEM Method in LS-DYNA Software
p.244

HomeSolid State PhenomenaSolid State Phenomena Vol. 224Experimental Validation of the Numerical Model of...

Experimental Validation of the Numerical Model of a Testing Platform Impact on a Road Mast

Abstract:

The article presents experimental validation of the numerical model of a testing platform impact on a support structure mast. Numerical analysis of explicit type was performed in LS-Dyna environment. Experimental tests of crash test type were conducted on testing track. Comparison of values of deformations measured at selected mast characteristic points with the values of deformations specified during numerical analyses was performed.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 224)

Pages:

222-225

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.224.222

Citation:

Cite this paper

Online since:

November 2014

Authors:

Artur Cichański*, Michał Stopel

Keywords:

Crash Test, LS-DYNA, Road Safety, Support Structures

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] CEN, EN 12767, Passive safety of support structures for a road equipment – requirements, classification and test methods, (2007).

Google Scholar

[2] A. Kiczko, T. Niezgoda, J. Nowak, P. Dziewulski, Numerical implementation of car impact into the modified road barrier, Journal of KONES Powertrain and Transport, Vol. 17 (2010).

Google Scholar

[3] Hallquist, J. O., LS-DYNA Keyword User's Manual. Version 971, Livemore Software Technology Corporation, Livermore (2007).

Google Scholar

[4] T. Niezgoda, A. Kiczko, W. Barnat, Experimental verification of road barriers on their abilities to absorb energy, Materials of 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, 2008, pp.187-188.

Google Scholar

[5] T. Niezgoda, A. Kiczko, W. Barnat, Numerical analysis of dynamic system-a motor car - a barrier- numerical analysis performed with LS Dyna software, Materials of 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, 2008, pp.189-190.

Google Scholar