High-Temperature Corrosion Resistance of Welded Joints in Sanicro 25 Steel

Abstract:

The trials conducted in sulfur– and chlorine–rich environment were aimed at simulating the conditions prevalent in operating power boilers. The tests conducted in the temperatures of 700°C and 750°C have been selected in such a way as to enable reference between them and the supercritical parameters of boiler steam. The analysis of the rate of high–temperature corrosion kinetics in the Sanicro 25 steel was carried out for up to 3000 hours. The aim of the tests was to establish the oxidation kinetics and evaluate the destruction of the new generation of Sanicro 25 steel in atmosphere containing Cl and S in temperature of 700°C and 750°C during up to 3000 hours of operation.

• Periodical: Solid State Phenomena (Volume 227)
• Pages: 401-404
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.227.401
• Online since: January 2015
• Authors: Przemysław Jamrozik*, Maria Sozańska
• Keywords: Austenitic Steel, Corrosion Resistance, Welded Joints

References

[1] P. Jamrozik, M. Sozańska, Characteristic of welded joints structure in Sanicro 25 steel, Sol. St. Phen. 212 (1) (2014) 71-74.

DOI: 10.4028/www.scientific.net/ssp.212.71

[2] P. Jamrozik, M. Sozańska, Evaluation of the applicability of Sanicro 25 steel in supercritical boilers, Sol. St. Phen. 212 (1) (2014) 201-204.

DOI: 10.4028/www.scientific.net/ssp.212.201

[3] T. Tokairin, K.V. Dahl, H. K. Danielsen, F. B. Grumsen, T. Sato, J. Hald, Investigation on long–term creep rupture properties and microstructure stability of Fe–Ni based alloy Ni–23Cr–7W at 700°C, Mat. Sci. Eng. A 565 (2013) 285-291.

DOI: 10.1016/j.msea.2012.12.019

[4] L. Intiso, L.G. Johansson, J.E. Svensson, M. Halvarsson, Oxidation Behaviour of Sanicro25 in O2/H2O Mixture at 600ºC, Oxid. Met. 77 (5-6) (2012) 209-235.

DOI: 10.1007/s11085-011-9281-3

[5] L. Intiso, L.G. Johansson, J.E. Svensson, M. Halvarsson, Oxidation of Sanicro25 in O2 and O2+H2O environments at 600–750ºC, Oxid. Met. 72 (4) (2012) 142-151.

DOI: 10.1007/s11085-015-9528-5

[6] A. Hernas, T. Wala, M. Staszewski, Characteristics and selection of steels for superheater with supercritical steam parameters, Mater. Sci. 30 (3) (2009) 143-151.

[7] A. Hernas, G. Moskal, J. Pasternak, Austenitic steels and nickel superalloys used in the construction of supercritical boilers, Ed. SITPH, Katowice, (2009).

[8] J. Pasternak, S. Fudali, A. Hernas, Technological properties of steel Sanicro 25 and alloy HR6W, Conference Materials, Ed. UKiP J&D Gębka (2013) 47-58.

[9] R. Rautio, S. Bruce, Alloy for ultracupercritical coal fired boilers, Adv. Mater. Proc. 166 (4) (2008) 35-37.