Portland Cement with Mineral Fillers and Polymer Additives

Abstract:

This paper is devoted to the study of the hardening process and the mechanical properties of composite cements. There were three mineral additions and two polymer ones, namely fly ash, limestone meal and marble powder, polymer dispersion and redispersible polymer powder used. The principal possibility of combining mineral fillers in the design of composite cements is shown. It has been established that the samples of cement stone based on binders modified with redispersible polymer powder have higher compressive and flexural strength, regardless of the type of filler.

• Periodical: Solid State Phenomena (Volume 284)
• Pages: 1063-1068
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.284.1063
• Online since: October 2018
• Authors: Irina K. Domanskaya*, Ekaterina S. Gerasimova
• Keywords: Composite Cement, Compressive Strength, Flexural Strength, Fly Ash, Limestone Meal, Marble Powder, Mineral Filler, Modification, Polymer Dispersion, Polymer Powder, Portland Cement

References

[1] Etsuo Sakai, Jun Sugita, Composite mechanism of polymer modified cement, Cement and Concrete Research. 25 (1) (1995) 127-135.

DOI: 10.1016/0008-8846(94)00120-n

[2] Min Wang, Rumin Wang, Hao Yao, Shameel Farhan, Shuirong Zheng, Zhujun Wang, Congcong Du, Hao Jiang, Research on the mechanism of polymer latex modified cement, Construction and Building Materials. 111 (2016) 710-718.

DOI: 10.1016/j.conbuildmat.2016.02.117

[3] GOST 31108-2003, Cements for General construction. Specifications, Russia (2003).

[4] I. Domanskaya, F. Kapustin, E. Mokhort, V. Oleynik, The main approaches of component selection for fine polymercement products and coatings, in: Proceeding 15th Int. Conf. on Building Materials «IBAUSIL», Weimar, Germany, 2003, pp.0523-0530.

[5] A. Frederik, R. Nikolya, Using redispersible powders «Rhoximat» in dry mixes production, Construction materials. 5 (2000) 8-9.

[6] M. Rogante, I. Domanskaya, E. Gerasimova, E. Vladimirova, Feasibility study for a neutron-based investigation of polymer cement concretes: submitted to MMMS (2013).

DOI: 10.13189/ujas.2013.010103

[7] V. Bhikshma, K. Rao, B. Balaji, An experimental study on behavior of polymer cement concrete, Asian Journal of Civil Engineering (Building and Housing). 5 (2011) 563-573.

[8] M. Zajac, M.B. Haha, Experimental investigation and modeling of hydration and performance evolution of fly ash cement, Materials and Structures. 47 (7) (2014) 1259–1269.

DOI: 10.1617/s11527-013-0126-1

[9] B.H. Bharatkumar, B.K. Raghuprasad, D.S. Ramachandramurthy, R. Narayanan, S. Gopalakrishnan, Effect of fly ash and slag on the fracture characteristics of high performance concrete, Materials and Structures. 38 (1) (2005) 63–72.

DOI: 10.1007/bf02480576

[10] F. Sandrolini, A. Saccani, The effect of polymer addition on the electrical behavior of ordinary and pulverized fly ash modified cement mortars, Materials and Structures. 30 (7) (1997) 412–417.

DOI: 10.1007/bf02498564

[11] F. Sandrolini, V. Bonora, A. Saccani, G. Dinelli, G. Belz, Pulverized fly ash recycling in composite materials for innovative building elements, in: Proceedings of the 1st Conf. on Chemical and Process Engineering, Florence, Italy, 1993, p.703.

[12] A. Motori, F. Sandrolini, G. Zappia, A. Saccani, Premix polymer-cement materials: workability, setting time and mechanical strength as influenced by epoxy resins, in: Proceedings of 15th Conference on Silicate Industry and Silicate Science, Budapest, Hungary, 1989, p.328.

[13] F.P. Torgal, S. Jalali, Eco-efficient Construction and Building Materials. 5 (2011) 75–129.

[14] L. Zheng, X. Huo, Y. Yuan, Strength, modulus of elasticity, and brittleness index of rubberized concrete, J. Mater. Civil. Eng. 20 (2008) 692–699.

DOI: 10.1061/(asce)0899-1561(2008)20:11(692)

[15] J.E. Bailey, S. Chanda, N.B. Eden, Fracture Mechanics and Failure Processes, in: Polymer Modified and Blended Hydraulic Cements, in: Fracture Mechanics of Ceramics, New York, 1985, p.157–174.

DOI: 10.1007/978-1-4615-7023-3_12