Possibilities of Processing of Slag Aggregate from Heap Koněv

Lukáš Prochazka; Jana Boháčová

doi:10.4028/www.scientific.net/SSP.292.79

Paper Titles

Influence of the Poisson’s Ratio on the Value of the Dynamic Modulus of Elasticity of Cement Materials in the Early Stage of Ageing
p.50

Estimation of Tensile Strength of High Strength Concrete Based on Experimental Results
p.56

Fracture Response of Fine-Grained Cement-Based Composite Specimens with Special Inclusions
p.63

Time Development of Concrete Strength in Comparison with the Development of Concrete Shrinkage
p.69

Possibilities of Processing of Slag Aggregate from Heap Koněv
p.79

Fracture Parameters of Concrete from Drill-Core Specimens from Objects at the Transgas Gas Control Center
p.85

Influence of the Amount of Ammonium Salts in Fly Ash on Concrete with Ternary Binders
p.91

Hydraulic Road Binder with High Share of Fly Ash after Denitrification
p.96

The Effect of Homogenization Procedure on Mechanical Properties of High-Performance Concrete with Partial Replacement of Cement by Supplementary Cementitious Materials
p.102

HomeSolid State PhenomenaSolid State Phenomena Vol. 292Possibilities of Processing of Slag Aggregate from...

Possibilities of Processing of Slag Aggregate from Heap Koněv

Abstract:

The aim of this work is to find out whether the slag aggregates from heap Koněv can be used in hydraulic mixtures based on traditional Portland cement as well as in alternative binders based on alkali activated blast furnace slag.In the experiment the basic physical-mechanical parameters of prepared mixtures were determined and the durability properties of these composites were verified. The composition of the aggregate extract and its influence on the properties of the prepared mixtures and the subsequent determination of the alkaline ions in slag aggregates were also verified.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 292)

Pages:

79-84

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.292.79

Citation:

Cite this paper

Online since:

June 2019

Authors:

Lukáš Prochazka*, Jana Boháčová

Keywords:

Alkali-Activated Material, Cement, Concrete, Slag Aggregate

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] ČSN EN 1744-6 Testing of chemical properties of aggregates - Part 6: Determination of the influence of leachate from recycled aggregate to the beginning of solidification of cement, Czech Standardization Institute (2006).

Google Scholar

[2] G. Plusquellec, M. R. Geiker, J. Lindgard, J. Duchesne, B. Fournier, K. DeWeerdt Determination of the pH and the free alkali metal content in the pore solution of concrete: Review and experimental comparison (2017).

DOI: 10.1016/j.cemconres.2017.03.002

Google Scholar

[3] M. Pešata Determination of basic physical-mechanical properties of slag aggregate, Ostrava (2016).

Google Scholar

[4] L. Procházka Possibilities of utilization of slag aggregate from heap Koněv, Ostrava (2017).

Google Scholar

[5] ČSN EN 206-1 Concrete - Part 1: Specification, performance, production and conformity (2013).

Google Scholar

[6] TP 138, Slag aggregate use in roads, Technical Conditions, Brno University of Technology, Faculty of Civil Engineering (2000).

Google Scholar