GFRP Reinforcement Behaviour under Multi-Axial Stress - Experimental Study

Vojtěch Kostiha; František Girgle; Ondřej Januš; Ivana Švaříčková; Petr Štěpánek

doi:10.4028/www.scientific.net/SSP.309.80

Paper Titles

Integrated Anchorage of Thin Façade Panels Made of Textile Reinforced Concrete
p.57

Compressive Strength of Various Types of Concrete Exposed to Elevated Temperature
p.62

Resistance of Concrete with Surface Treatment against Chemical Deicing Agents
p.68

Fracture Parameters of Alkali-Activated Aluminosilicate Composites with Ceramic Precursor
p.73

GFRP Reinforcement Behaviour under Multi-Axial Stress - Experimental Study
p.80

The Effect of Eccentricity of Concrete Specimen on Measured Value of Modulus of Elasticity
p.87

Verification of Durability Properties of Alkali-Activated Materials Based on Blast Furnace Slag with Fly Ash
p.93

Measurement of Early-Age Strength of Concrete
p.98

The Use of Maturity Method for Estimating In Situ Compressive Strength of Concrete
p.103

HomeSolid State PhenomenaSolid State Phenomena Vol. 309GFRP Reinforcement Behaviour under Multi-Axial...

GFRP Reinforcement Behaviour under Multi-Axial Stress - Experimental Study

Abstract:

This paper is focused on the design of concrete structures reinforced with modern composite material – Fibre Reinforced Polymer (FRP) reinforcement. It presents actual results from the testing of FRP rods under a simultaneous tensile and shear loading. The results were experimentally obtained on specimens of Glass Fibre Reinforced Polymer (GFRP) reinforcement. The text also points out that the widely used fib Bulletin no. 40 technical report does not provide sufficiently reliable formulas and may overestimate the load-bearing capacity of the element. Therefore, the conclusions formulated are primarily concerned with their practical use in the design of this modern material.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 309)

Pages:

80-86

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.309.80

Citation:

Cite this paper

Online since:

August 2020

Authors:

Vojtěch Kostiha*, František Girgle, Ondřej Januš, Ivana Švaříčková, Petr Štěpánek

Keywords:

Combination of Tensile, Fibre Reinforced Polymer (FRP) - Internal Reinforcement, Shear Loading

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] fib Bulletin no. 40; FRP reinforcement in RC structures: technical report prepared by a working party of Task Group 9.3, FRP (Fibre Reinforced Polymer) reinforcement for concrete structures. 1st pub. Lausanne: International Federation for Structural Concrete, 2007, 147 s. ISBN 978-2-88394-080-2.

DOI: 10.1142/9789812704863_0036

Google Scholar

[2] ISO 10406-1:2015, Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 1: FRP bars and grids; 2008; Geneva, Switzerland.

DOI: 10.3403/30356320

Google Scholar

[3] ASTM D7617 / D7617M-11(2017), Standard Test Method for Transverse Shear Strength of fibre-reinforced Polymer Matrix Composite Bars, ASTM International, West Conshohocken, PA, (2017).

DOI: 10.1520/d7617_d7617m-11r17

Google Scholar

[4] Girgle, F.; Prokeš. J.; Januš, O.; Kostiha. V.; Štěpánek, P.: Kompozitní výztuž do betonu - perspektivní materiál pro odolné a trvanlivé betonové konstrukce, Beton TKS, (2017).

Google Scholar

[5] S. W. Tsai: Strength Theories of Filamentary Structures, Fundamental Aspects of fibre Reinforced Plastic Composites, (1968).

Google Scholar

[6] Lupasteanu, V; Taranu, N.; Hohan R.; Ciobanu, P.: Off-axis mechanical properties of FRP composites, The 5th International Conference on Advanced Materials and Systems, Bucharest, Romania, p.79 – 84, (2014).

Google Scholar