The Use of Overburden Clay in Ceramic Production

Abstract:

How the degree of grinding of clays with carbonate inclusions in the form of dolomite affects the quality of ceramic products, is examined. It is shown that unusable clay with large dolomite inclusions can be used in ceramic production after grinding particles to a size of less than 0.5 mm. It has been established that fine grinding of clay can eliminate the formation of “blowing” defect, while the frost resistance of ceramics increases. Clay unsuitable in the ceramic production can be used after fine processing to produce facing building bricks with a compressive strength above 15 MPa and frost resistance of more than 50 cycles, ceramic roof tiles with frost resistance of more than 100 cycles, majolica and water-proof pottery products.

• Periodical: Solid State Phenomena (Volume 316)
• Pages: 1044-1049
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.316.1044
• Online since: April 2021
• Authors: Irina A. Pavlova*, Maria Sapozhnikova, Elena P. Farafontova
• Keywords: “Blowing” Defect, Ceramic Roof Tile, Frost Resistance of Ceramics, Overburden Clay, Red-Burning Clay, Water-Proof Pottery

References

[1] I A. Pavlova, I.D. Kashcheev, K.G. Zemlyanoi et al, Tyumen Clays in the production of building ceramic, Glass Ceram. 72 (2016) 341-344.

DOI: 10.1007/s10717-016-9787-x

[2] I.A. Pavlova, Keramzit production based on overburden rock in the Bainovskoe deposit, Glass Ceram. 74 (2017) 104-106.

DOI: 10.1007/s10717-017-9938-8

[3] A.V. Belyakov and V.S. Bakunov, Development of rugged and crack-resistant structures in ceramics (review), Glass Ceram. 55 (1998) 13–18.

DOI: 10.1007/bf03180137

[4] R. Rekecki, J. Ranogajec, A. Oszkó and E. Kuzmann, Effects of firing conditions on the properties of calcareous clay roofing tiles, J. Mater. Civ. Eng. 26 (2014) 175-183.

DOI: 10.1061/(asce)mt.1943-5533.0000783

[5] S.G. Dolgikh, A.K. Karklit, G.M. Katorgin et al, Clay feedstock with carbonate inclusions, Refractories 35 (1994) 165-167.

DOI: 10.1007/bf02227383

[6] B.I. Terekhovskii, The use of sands with carbonate inclusions in the ceramic industry, Glass Ceram. 18 (1961) 134-136.

DOI: 10.1007/bf00668485

[7] V.S. Bakunov and A.V. Belyakov, Influence of point defects on ceramic creep, Refractories and Industrial Ceramics 40 (1999) 187-195.

DOI: 10.1007/bf02762281

[8] C. Kinoshita, Characteristics of defects in ceramic materials, Radiation Effects and Defects in Solids 148 (1999) 63–63.

DOI: 10.1080/10420159908229084

[9] J. Pelleg, Imperfections (Defects) in ceramics, Mechanical properties of ceramics, solid mechanics and its applications, Springer International Publishing, Switzerland, 2014, p.173–279.

DOI: 10.1007/978-3-319-04492-7_3

[10] S. Saremi, R. Gao, A. Dasgupta and L. W. Martin, New facets for the role of defects in ceramics, Amer. Ceram. Soc. Bull. 97 (2018) 16-23.

[11] M.W. Barsoum, Defects in ceramics, In book: Fundamentals of ceramics, Taylor & Francis Group, 2nd Ed., (2019).

[12] S.N. Grigoriev and M.A. Volosova, Comprehensive analysis of internal and surface defects of ceramics, MATEC Web of Conferences 65 (2016) 02004.

DOI: 10.1051/matecconf/20166502004

[13] I.A. Pavlova, S.S. Kutasheva and E.P. Farafontova, Production technology of ceramic roof tiles based on raw materials of Ural region, IOP Conference Series Materials Science and Engineering 687 (2019) 022022.

DOI: 10.1088/1757-899x/687/2/022022

[14] I.A. Pavlova, M.A. Sapozhnikova and E.P. Farafontova, Lightening of ceramic bricks based on red-burning clay, IOP Conference Series Materials Science and Engineering 687 (2019) 022021.

DOI: 10.1088/1757-899x/687/2/022021

[15] E.M. Dyatlova, G.Y. Minenkova & T.I. Mikhal'skaya, Obtaining facing tiles based on low-fusing clays, Glass Ceram. 51 (1994) 308-311.

DOI: 10.1007/bf00679830

[16] V.M. Loginov & N.S. Yugai, Low-melting clays from the Gzhel'skoe deposit, Glass Ceram. 56 (1999) 226-228.

DOI: 10.1007/bf02681498

[17] V.Z. Abdrakhimov & E.S. Abdrakhimova, Influence of coal-enrichment wastes on the heat and mass transfer in firing light bricks, Coke Chem. 54 (2011) 72-75.

DOI: 10.3103/s1068364x11020025

[18] B.M. Datsenko, N.P. Grebenyuk, O.V. Khromenko et al, Improvement of facing brick production. Glass Ceram. 57 (2000) 177–178.

DOI: 10.1007/bf02681270

[19] A.K. Karklit & S.G. Sennikov, Clays of the Kholm deposit, Glass Ceram. 54 (1997) 20-22.

DOI: 10.1007/bf02782519

[20] A.I. Poznyak, I.A. Levitskii & S.E. Barantseva, Production of interior facing tiles using local raw materials, Glass Ceram. 69 (2012) 77–80.

DOI: 10.1007/s10717-012-9418-0

[21] B.T. Sabirov, Z.R. Kadyrova & S.S. Tairov, Development of optimal compositions of ceramic tiles using dune sand, Glass Ceram. 75 (2019) 363-365.

DOI: 10.1007/s10717-019-00085-7

[22] N.V. Boltakova, G.R. Faseeva, R.R. Kabirov et al, Utilization of inorganic industrial wastes in producing construction ceramics. Review of Russian experience for the years 2000–2015, Waste Management 60 (2017) 230-246.

DOI: 10.1016/j.wasman.2016.11.008

[23] M. Raimondo, C. Ceroni, M. Dondi et al, Durability of clay roofing tiles: the influence of microstructural and compositional variables, J Eur. Ceram. Soc. 29 (2009) 3121-3128.

DOI: 10.1016/j.jeurceramsoc.2009.06.004

[24] V. Ducman, A.S. Škapin, M. Radeka, Frost resistance of clay roofing tiles: Case study, Ceram. Int. 37 (2011) 85-91.

DOI: 10.1016/j.ceramint.2010.08.012

[25] J Malaiškienė, R. Mačiulaitis, Frost resistant ceramics produced from local raw materials and wastes, J Pro Eng. 57 (2013) 739-745.

DOI: 10.1016/j.proeng.2013.04.093