Behavior of Basalt Fibers in an Alkaline Environment

Abstract:

The article presents experimental studies of the composite binders modification with basalt fibers waste. The introductory part provides studies overview of basalt fibers resistance in various aggressive environments. It was revealed that the most aggressive environment in relation to basalt fibers and other products based on them is alkaline. Also, it is promising to use their production waste as a modifying additive for building compositions. But in this case, the problems associated with leaching are equally relevant for each of the reinforcing components. The components characteristics and the test procedure are described and illustrated in the next section. The following are the results of determining the strength characteristics of samples obtained on a composite binder modified with basalt fibers and acid ash productions waste. Finally, a brief analysis and conclusions are presented to confirm the effectiveness of reducing the environment aggressiveness in relation to the basalt fibers production waste adding acidic ash to the composition.

• Periodical: Solid State Phenomena (Volume 334)
• Pages: 253-258
• DOI: https://doi.org/10.4028/p-ki4ym1
• Online since: July 2022
• Authors: Victoriya Petropavlovskaya*, M.Y. Zavadko, K.S. Petropavlovskii, Tatiana B. Novichenkova
• Keywords: Acid Ash, Basalt Fiber, Calcium Hydroxide, Cement Composition, Gypsum Composition, Lime

References

[1] Shatalov, A.V., Sevostyanov, V.S., Shatalov, V.A.: Innovative ways to solve current problems of nature management and environmental protection. Materials of reports of the International Scientific and Technical Conference. 195-200 (2018).

[2] Wang, Ya., Yang, Ch., Wang, N., Zhang, T.T., Yao F.: Flaw detection 4, 22-31(2020).

[3] Shlyakhova, E.I., Levchuk, N.V.: Resource-energy-efficient technologies in the construction complex of the region 10, 170-174 (2018).

[4] Chiadigikaobi, P.Ch., Emiri, D.A.: Science and Business: ways of development 11, 129-132 (2018).

[5] Aidaraliev, Zh.K., Kainazarov, A.T., Abdiev, M.S., Sopubekov, N.A. Bulletin of the Kyrgyz-Russian Slavic University 8, 102-105 (2019).

[6] Mahltig, Boris: Basalt Fibers. Inorganic and Composite Fibers,195-217 (2018).

DOI: 10.1016/b978-0-08-102228-3.00009-8

[7] Li Yan, Faliang Chu, Wanyong Tuo, Xiaobo Zhao, Yan Wang: Review of research on basalt fibers and basalt fiber-reinforced composites in China (I): Physicochemical and mechanical properties. Polymers and Polymer Composites (2020).

DOI: 10.1177/0967391120977396

[8] Kowalik Tomasz:Waste basalt fibers as an alternative component of fiberconcrete. Materials Today: Proceedings 38(1) (2020).

DOI: 10.1016/j.matpr.2020.10.140

[9] Zongwen Li, Jianxun Ma, Hongmin Ma, Xin Xu: Properties and Applications of Basalt Fiber and Its Composites. IOP Conference Series Earth and Environmental Science 186(2), 012052 (2018).

DOI: 10.1088/1755-1315/186/2/012052

[10] Nagarajan, Divyah, Thenmozhi, R., Meyappan Neelamegam, R. Prakash: Characterization and behavior of basalt fiber reinforced lightweight concrete. Structural Concrete 22(2) (2020).

DOI: 10.1002/suco.201900390

[11] Muhammad Nur Afiq Tunan, Sapuan, S.M., Ilyas, R.A.: Mechanical properties of basalt fiber reinforced polymer composites: A review. Seminar on Advanced Bio- and Mineral based Natural Fibre Composites (SBMC2021), 14-17 (2021).

DOI: 10.1201/9781003220947-3

[12] Mehran Khan, Mingli Cao, Chaopeng Xie, Majid Ali: Efficiency of basalt fiber length and content on mechanical and microstructural properties of hybrid fiber concrete. Fatigue & Fracture of Engineering Materials & Structures, 44(8) (2020).

DOI: 10.1111/ffe.13483

[13] Vinotha Jenifer John, Brindha Dharmar: Influence of basalt fibers in the mechanical behavior of concrete—A review. Structural Concrete, 22(2).

DOI: 10.1002/suco.201900086

[14] Vedagiri: Strength and durability of basalt fiber and basalt-fiber cement composites. (2020).

[15] Myadaraboina, Himabindu, Law, David, Patnaikuni, I.: Durability of basalt fibers in concrete medium. Proceedings of International Structural Engineering and Construction 1(1), (2014).

DOI: 10.14455/isec.res.2014.41

[16] Gang Wu, Xin Wang, Zhishen Wu, Zhiqiang Dong, Guangchao Zhang: Durability of basalt fibers and composites in corrosive environments. Journal of Composite Materials 49(7), 873-887 (2015).

DOI: 10.1177/0021998314526628

[17] Jianxun Liu, Ning Li, Meirong Chen, Jianping Yang, Biao Long: Durability of basalt fiber-reinforced polymer bars in wet-dry cycles alkali-salt corrosion. Science and Engineering of Composite Materials 26(1), 43-52 (2018).

DOI: 10.1515/secm-2018-0030

[18] Shuni, Ying, Xiaodong, Zhou: Chemical and thermal resistance of basalt fiber in inclement environments. Journal of Wuhan University of Technology-Mater Sci Ed 28(3) (2013).

DOI: 10.1007/s11595-013-0731-4

[19] Sevostyanov, V.S., Shatalov, V.A. Golubeva, U.V.: Processing of basalt fiber production waste. IOP Conference Series Materials Science and Engineering, 327(4):042103 (2018).

DOI: 10.1088/1757-899x/327/4/042103

[20] Kowalik, Tomasz, Ubysz, Andrzej: Waste basalt fibers as an alternative component of fiberconcrete. Published version (2018).

DOI: 10.1016/j.matpr.2020.10.140

[21] Krivoborodov, Yu. R., Samchenko, S.V.: The increase of hydration activity of portland cement by additives of crystalline hydrates. Materials Science Forum 974 MSF, 195–200 (2020).

DOI: 10.4028/www.scientific.net/msf.974.195

[22] Petropavlovskaya, V. B., Novichenkova, T. B., Zavadko, M. Yu.: Gypsum composites with fine fillers. TvSTU, Tver.