Search results

Second, instrument quantity should meet the actual need under the premise of reduction.
Data arrangement and analysis By July 2010, we had acquired data in four times with 72 periods of observations for nine points.
We use the TGO (Trimble Geomatics Office) data processing software to handle the data, and then we can obtain coordinates of each period of each point after adjustment.
When field observation is finished, we use TGO software to deal with the data.
Data proceeding mainly contains the following respects [3].

Flue gas power plant 2 * 600MW units of #1 furnace denitration device using selective catalytic reduction (SCR) technology, the catalyst for cellular type, liquid ammonia reductant.
（Standard state, dry basis, 6%O2) Table 1 A, B outlet side of the reactor NOx data analysis The export side A reactor The export side B reactor The maximum value 252.2mg/m3 The maximum value 65.6mg/m3 The minimum value 16.4mg/m3 The minimum value 2.05mg/m3 The relative standard deviation 102.1% The relative standard deviation 74.4% 1.2 Evaluation of representative SCR outlet flue gas composition ratio and CEMS data In the unit load under 600MW conditions，The result isshownin Table 2:（ Standard state, dry basis, 6%O2) Table 2 Evaluation of representative SCR outlet flue gas composition ratio and CEMS data Project Single bit A side B side The measured average value CEMS The deviation coefficient The measured average value CEMS The deviation coefficient SCR outlet O2 % 4.6 4.2 1.10 4.1 3.6 1.14 SCR outlet NOx mg/m3 90.2 22.1 4.08 28.7 18.6 1.54 Optimization and adjustment of former CEMS monitoring value and the actual flue cross-section mean value of difference, can
The adjustment and optimization of the ammonia injection after AIG 2.1 Denitration outlet NOx distribution The concentration distribution of SCR export NOx 600MW condition after optimization，The result is shown in Table 3: (Standard state , dry basis, 6%O2) Table 3 A, B outlet side of the reactor NOx data analysis The export side A reactor The export side B reactor The maximum value 92.5mg/m3 The maximum value 67.9mg/m3 The minimum value 55.1mg/m3 The minimum value 53.3mg/m3 The relative standard deviation 10.0% The relative standard deviation 7.0% 2.2 Evaluation of representative SCR outlet flue gas composition ratio and CEMS data In the unit load under 600MW conditions，The result isshownin Table 4:（ Standard state, dry basis, 6%O2) Table 4 Evaluation of representative SCR outlet flue gas composition ratio and CEMS data Project Single bit A side B side The measured average value CEMS The deviation coefficient The measured average value CEMS The deviation
coefficient SCR outlet O2 % 3.4 3.2 1.06 4.5 4.3 1.05 SCR outlet NOx mg/m3 70.5 59.6 1.18 92.2 80.3 1.15 Unit load condition of 600MW, through the adjustment and optimization of the AIG ammonia, A side outlet O2 deviation coefficient is 1.06, the outlet NOx concentration deviation coefficient is 1.18, B side outlet O2 deviation coefficient is 1.05, the outlet NOx concentration deviation coefficient is 1.15, the CEMS data representation is obviously improved.
Economic analysis Before and after the experiment, the amount of power generation for a certain period of time of the unit and denitrification system of ammonia consumption were simple statistics, the data is shown in the Table 5.

And because the procedure in the temperature data sheet is composed by two temperature data composition, it needs eight digital quantities[8-10].
Through the usage of SCM, it had the data processing and control unit, it displayed environment temperature real-time changing value by using the change of thermal resistance voltage, transformed the temperature signal data to the SCM through the converter transmission to be calculate and processed.
At the same time, it carried on the output and end of the driver when the data of SCM was processed, the current temperature data was displayed through the lights.
This system achieved the purpose of the multipoint temperature signal data collection and the control of network monitoring.
l2 - 1 ∞ model reduction for switched LPV systems with average dwell time" IEEE Trans.

And it contains the richer content, the larger the amount of file data, as thus the traditional theme keyword search technology cannot meet the needs of the way of images and audio and video files.
But with today’s the increasing number of multimedia files data network, the traditional text-based search engines increasingly inadequate the needs of users.
Traditional functions about multimedia utilization is referred to their syntactical properties: functions manipulate the temporal structure of data types such as forward and rewinding [2].
In contrast to these traditional media, multimedia files spread over the Internet can get more detailed information of media audiences: Including gender, age, income, education, occupation and other demographic data, you can also get the audience’s behavior data, including the number of visits, access time, access frequency, duration, etc.
Content feature extraction refers to find expression of the original signal of audio, to extract data that can represent the original signal.

TSA is a well established non-contacting analysis technique that provides full-field stress data over the surface of a cyclically loaded component.
Stainless steel specimens were deformed to contain 2% to 10% plastic strain in increments of 2% to provide a large range of strain data.
Tests were conducted at 5 Hz, 7.5 Hz and 10 Hz to assess the effect of the paint coating on the recorded data.
All data was collected from the same 316L specimen under the same loading conditions, and the specimen was not removed between tests.
From the study, it is clear that if very high accuracy is required, comparisons should not be made between data sets recorded under different conditions.

In order to solve fish classification problems based on acoustic scattering data, temporal centroid(TC) features and discrete cosine transform(DCT) coefficients features used to analyze acoustic scattering characteristics of fish from different aspects are extracted.
The processing results of actual experimental data show that multi-feature fusion method can improve the identification rate at about 5% effectively.
Features extraction for fish Acquisition method of acoustic scaterring data.
Features extraction process is shown in Fig.3, which includes features extraction, features fusion, features dimension reduction, etc.
The data acquisition method are shown in Fig.2, a total of 500 groups of sample data, wherein the 200 groups are the classifier training samples sets, the remaining 300 groups are the classifier test samples sets, training samples sets and test samples sets are constructed through the way of random extraction.

In the process, it is a very important significance in different industries about how to use the platform of network communication realizes classification retrieval technology of video data stream in the network.
Study on the basic ideas and processes is shown in Fig. 1: The focus of the study has two, first, because the video data flow is very large, how to reduce the load on both ends of the client and the server at the same time in the communication network.
Ease of Use Research of Communication Network System Structure The client and the server burden increasingly heavy, large video data stream was transmitted in the communications network, if simply relying on the traditional C/S Network transmission mode, certainly cannot meet the performance requirements of real-time video.
Mainly for video data information analysis, resource collection agent, client implementation user interaction with the video data representation, C/M/S mode can reduce the load on both ends of the client and the server, makes them collaborative work to improve service quality and efficiency, and through the search semantic processing object attributes to improve the retrieval performance.
And using canny reduction methods, technology through inheritance to reduce analysis of candidate region, went on to the regional group and returns the average of a series of combinations of various large enough rectangle.

In this paper, an analysis of tunneling piezoresistive effect of p-type polysilicon nanofilms is presented based on the experimental data.
After the measurement of their gauge factor, an analysis of tunneling piezoresistive effect is presented based on the experimental data.
The reductions of carriers in grains create the depletion region in both sides of each grain.
Comparison of experimental data and tunneling piezoresistive theory curves In Fig. 3, from left to right, the experimental data is fixed by average value of 22, 20, 22, 28, 28, 22, 36, 22 groups of test results in same samples, respectively.
In Fig. 3, almost all of experimental data are included within the two curves, K=1.3 and K=1.5, respectively.

Based on the data and the topography from the above Table.5 and Fig.7, the mass percent of Germanium is 89.90%, the mass percent of carbon and oxygen in the protuberance region is between the percentage composition of protuberance and matrix.
After repeated experiments we can speculate that a small quantity of oxygen in the germanium single crystal probably derived from incomplete reduction germanium dioxide and vapor mixed in the argon atmosphere.
Graphite is not inclined to mix with germanium in the sense of metallurgy, at least 108cm-3 of carbon solid solubility at the melting point of germanium, the conclusion can be extrapolated from high-temperature data acquired at earlier time [14].
Carbon and oxygen were the main electrically inactive inclusions in the germanium single crystal, carbon inclusions derived chiefly from single crystal furnace system, a small quantity of oxygen in the germanium single crystal probably derived from incomplete reduction germanium dioxide and vapor in the argon atmosphere.

Non-contact reading, writing, and deleting procedures can be performed on data stored in memories.
Literature Review RFID is a technique used for automatic identification and data retrieval.
The processing screen of the central system could instantly provide exact locations of players for the surveillance of players on the competition routs, ensuring their safety, and reduction of manpower, material resources, and financial resources consumed.
The greatest contribution to the earth and human beings is to find out a way of energy saving and carbon reduction for our environment by designing and developing innovative products with the latest technology.