Search results

The current status of emission of biomass power plants in China According to the newest plan of the National Energy Administration, China’s installed capacity for biomass will reach 13 GW [3] by the end of 2015, which means that about one hundred biomass power plants with a generation capacity of 30 MW for each unit will be structured and put into operation per year from now.
The experimental results[8] showed that the performance of desulphurization and denitrification related to the pore structures and the surface chemistry of activated coke, that the pore volume was the key factor, and that the surface function was an important factor which was the activating center for adsorption and catalysis of SO2 and NO.

Bachu and Bennion (2007) pointed out that the capillary pressure, displacement characteristics and storage integrity are not only influenced by pore structure, saline aquifers and capping layer, but also by pressure, temperature and salinity. 4.4 Linkages between various experiments Interfacial tension is microscopic force, and relative permeability and capillary pressure are macroscopic performance.
Industrial &Engineering Chemistry Research, 1995, 34(12): 4371-4377
Porous Media: Fluid Transport and Pore Structure[M].

Study on the Synthesis of Isoamyl acetate Catalyzed by Strong Acidic Cation Exchange Resin Ping Lan1,2,a, Lihong Lan1,2,b, Tao Xie1,2,c, Anping Liao1,2,d,* 1School of Chemistry and Eco-engineering of Guangxi University for Nationalities, Nanning, China; 2Key Laboratory of Chemical and Biological Transforming Process, University of Guangxi, Nanning, China aemail:lanping1969@yahoo.com.cn, bemail:lanlihong2004@163.com, cemail:gxunhg@sina.com, demail:gxanping@sina.com Keywords: Isoamyl acetate; Acetic acid ; Isoamylol ; Cation exchange resin; Esterification reaction Abstrct : Isoamyl acetate was synthesized from isoamylol and glacial acetic acid with strong acidic cation exchanger as catalyst.
Fig. 1 The mass spectrum diagram of product From the mass spectrum diagram analysis, the structure of the product can be for: The product was isoamyl acetate according to the carbon frame structure.

The current development of high-precision, high-resolution and structure miniaturized sensors are given priority to with functional sensors..
Light intensity modulation type because of simple structure, large measurement range are applied in general engineering measurement occasions, whose accuracy requirements are not too high; require a higher place on the measurement accuracy using polarization and phase modulation; light intensity modulation, polarization modulation, phase modulation, relatively vulnerable to environmental interference, relatively speaking, the wavelength modulation are convenient and simple, and generally do not need to take corrective action.
Brazing metallized fiber surface chemistry can be directly related to the object to be measured soldering, or further chemical plating thicker, buried in the metal to be tested in vivo [2].

Introduction Manganese oxides A1-xBxMnO3+δ (where A is trivalent rare-earth and B is divalent metal such as Ca, Sr, Ba, Pb) with perovskite structure have been attracting much attention because of their high electronic conductivity and especially since the discovery of their colossal magnetoresistance [1].
It can be seen that the single phase cubic perovskite structure was obtained in LaMnO3 (LMO) and La0.7Ca0.3MnO3 (LCM).
Salifoglou: Inorganic Chemistry Vol. 39 (2000), p. 4044

Lotników 32/46, 02-668, Warsaw, Poland 2 Institute of Nuclear Chemistry and Technology, ul.
Nevertheless, in order to meet the requirements of a number of new applications, the said tungstates which decide on the nanocomposite structure should be available in the form of a powder.
From the IR spectra shown in Figure 8 it seems that high-purity double tungstate structures can be easily obtained by introducing a SI step.

Effects of Sn and Mo Contents on the Electrochemical Behavior of Biomedical Ti-Mo-Sn Alloys Prepared in the Powder Metallurgy Process Grzegorz Dercz1,a*, Wojciech Simka2,b, Alicja Kazek-Kęsik2,c, Artur Maciej2,d and Sylwia Ogierman1,e 1Institute of Materials Science, University of Silesia, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland 2Faculty of Chemistry, Silesian University of Technology, B.
At low temperatures it has a closed packed hexagonal crystal structure (hcp), which is commonly known as α, whereas above 883°C it has a body centered cubic structure (bcc) termed β.

Study of Cement Composites Properties with Filler Based on Wood Pulp KIDALOVA Lucia1,a*, STEVULOVA Nadezda1,b and GEFFERT Anton2,c 1Technical University of Kosice, Faculty of Civil Engineering, Institute of Environmental Engineering, Vysokoskolska 4, 042 00 Košice, Slovakia 2Technical University in Zvolen, Faculty of Wood Sciences and Technology, Department of Chemistry and Chemical Technologies, T.G.
Porosity of composites is formed by the micro gaps inside concrete matrix, the gaps and flaws at the interfaces between wood pulp and matrix, the hollow spaces in wood structure, the capillaries and spaces between bundles of fibrils and micro fibrils.
Higher cellulose content in wood pulp contributes to a higher penetration of water molecules in the cellulose network structure.

Experimental Reactor structure Fig.1 Schematic of experimental apparatus The experimental apparatus (Fig.1) consisted of a reactor system, a power system and a measuring system.
The best structure in our experiment system consists of 5 mm gas gap, the needle sealed with glass and the acidic condition.
Applied Chemistry, 83 (10) (2010) 1799-1803

Efficient Oxidative Desulfurization (ODS) of Commercial Diesel with TBHP under Mild Conditions Catalyzed by Polymolybdates Supported on Al2O3 Wan Nazwanie Wan Abdullah1,a, Rusmidah Ali1,b, Wan Azelee Wan Abu Bakar1,c* 1Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia anazwanie90@gmail.com, brusmidah@kimia.fs.utm.my, cwanazelee@yahoo.com Keywords: Polymolybdates catalyst, Oxidative desulfurization, diesel, tert-butyl hydorperoxide, dimethyl formamide Abstract Due to the low specifications for sulfur content in diesel, a lot of research work are been conducted to develop alternative method for desulfurization.
The catalysts possess amorphous structure and only dominated by alumina support.
XRD diffractograms showed that the catalyst was highly amorphous in structure and EDX analysis confirmed the presence of Mo and P in the catalyst.